PN AJ 45

Swage nipple, DKJ angle 45°

  • Image_1 Image_1
  • Image_2 Image_2

Properties

Application area Swage nipple for HD 100 to HD 400, KP and TE hoses
Connection 1 UN/UNF nut threads
Material Steel
Online-Shop https://shop.hansa-flex.com/de/PNAJ45
Sealing form 1 74° inner cone
Short code DKJ
Standard ISO 8434-2
Surface electro galvanised

Hints

Die passende Fassung bitte nach dem Schlauchtyp auswählen.

Article Table

Product Name L1 mm L2 mm S1 Betriebsdruck bar G1 Zoll DN Size
Product Name L1 mm L2 mm S1 Betriebsdruck bar G1 Zoll DN Size
PN04AJ0645 54.5 mm 12.5 mm 14 410.0 bar 7/16"-20 UNF 3/16" 5 3
PN06AJ45 61.5 mm 14.0 mm 14 410.0 bar 7/16"-20 UNF 1/4" 6 4
PN06AJ0845 62.0 mm 13.5 mm 17 410.0 bar 1/2"-20 UNF 1/4" 6 4
PN06AJ1045 62.5 mm 14.0 mm 19 350.0 bar 9/16"-18 UNF 1/4" 6 4
PN08AJ45 68.5 mm 18.5 mm 17 410.0 bar 1/2"-20 UNF 5/16" 8 5
PN08AJ1045 64.0 mm 15.0 mm 19 350.0 bar 9/16"-18 UNF 5/16" 8 5
PN10AJ0845 73.0 mm 18.5 mm 17 350.0 bar 1/2"-20 UNF 3/8" 10 6
PN10AJ45 70.5 mm 17.5 mm 19 350.0 bar 9/16"-18 UNF 3/8" 10 6
PN10AJ1345 72.0 mm 19.0 mm 24 345.0 bar 3/4" -16 UNF 3/8" 10 6
PN10AJ1645 72.5 mm 19.5 mm 27 345.0 bar 7/8" -14 UNF 3/8" 10 6
PN13AJ45 80.5 mm 20.5 mm 24 345.0 bar 3/4" -16 UNF 1/2" 12 8
PN13AJ1645 81.5 mm 21.5 mm 27 345.0 bar 7/8" -14 UNF 1/2" 12 8
PN13AJ2045 82.5 mm 22.5 mm 32 345.0 bar 1.1/16" -12 UN 1/2" 12 8
PN16AJ1445 93.5 mm 30.0 mm 36 345.0 bar 1.3/16" -12 UN 5/8" 16 10
PN16AJ45 96.5 mm 25.5 mm 27 345.0 bar 7/8" -14 UNF 5/8" 16 10
PN16AJ2045 97.0 mm 26.0 mm 32 345.0 bar 1.1/16" -12 UN 5/8" 16 10
PN20AJ1445 108.5 mm 29.0 mm 36 345.0 bar 1.3/16" -12 UN 3/4" 19 12
PN20AJ45 108.0 mm 28.5 mm 32 345.0 bar 1.1/16" -12 UN 3/4" 19 12
PN20AJ2545 108.5 mm 29.0 mm 41 275.0 bar 1.5/16" -12 UN 3/4" 19 12
PN25AJ1445 117.5 mm 32.5 mm 36 275.0 bar 1.3/16" -12 UN 1" 25 16
PN25AJ45 134.5 mm 32.5 mm 41 275.0 bar 1.5/16" -12 UN 1" 25 16
PN25AJ3245 135.5 mm 34.0 mm 50 200.0 bar 1.5/8" -12 UN 1" 25 16
PN32AJ45 161.0 mm 41.0 mm 50 200.0 bar 1.5/8" -12 UN 1.1/4" 31 20
PN32AJ4045 162.0 mm 42.0 mm 60 170.0 bar 1.7/8" -12 UN 1.1/4" 31 20
PN40AJ45 184.5 mm 46.5 mm 60 170.0 bar 1.7/8" -12 UN 1.1/2" 38 24
PN50AJ45 231.0 mm 67.0 mm 75 170.0 bar 2.1/2" -12 UN 2" 51 32
DN = Nenndurchmesser, Nennweite

Disclaimer

Despite careful checking, we cannot guarantee the accuracy of all information included on this site, and we accept no liability.
All data and information in our online catalogue are based on currently valid standards and the regulations from the employer's liability insurance association. Product safety can only be guaranteed when our assembly instructions are carefully observed. Non-adherence to these regulations can affect product operation and functioning and result in a loss of warranty. Our warranty is only valid for HANSA-FLEX products. Our products are constantly subject to further development and technical changes are therefore possible.