PN AJ 90

Swage nipple, DKJ angle 90°



Properties

Connection 1 UN/UNF nut threads
Sealing form 1 74° inner cone
Application Swage nipple for HD 100 to HD 400, KP and TE hoses
Standard ISO 8434-2
Short code DKJ
Surface electro galvanised
Material Steel

Hints

Choose the appropriate ferrule based on the hose type.

Article Table

Product Name DN Size Inches Operating pressure bar G1 L1 mm L2 mm S1
Product Name DN Size Inches Operating pressure bar G1 L1 mm L2 mm S1
PN 04 AJ 06 90 5 3 3/16" 410,0 7/16"-20 UNF 47,5 26,0 14
PN 06 AJ 90 6 4 1/4" 410,0 7/16"-20 UNF 57,0 26,0 14
PN 06 AJ 08 90 6 4 1/4" 410,0 1/2"-20 UNF 57,0 27,0 17
PN 06 AJ 10 90 6 4 1/4" 350,0 9/16"-18 UNF 57,0 28,0 19
PN 08 AJ 90 8 5 5/16" 410,0 1/2"-20 UNF 56,5 33,0 17
PN 08 AJ 10 90 8 5 5/16" 350,0 9/16"-18 UNF 57,5 30,5 19
PN 10 AJ 08 90 10 6 3/8" 350,0 1/2"-20 UNF 66,5 37,5 17
PN 10 AJ 90 10 6 3/8" 350,0 9/16"-18 UNF 63,0 35,0 19
PN 10 AJ 13 90 10 6 3/8" 345,0 3/4"-16 UNF 63,0 37,0 24
PN 10 AJ 16 90 10 6 3/8" 345,0 7/8"-14 UNF 63,0 38,0 27
PN 13 AJ 90 12 8 1/2" 345,0 3/4"-16 UNF 71,5 42,5 24
PN 13 AJ 16 90 12 8 1/2" 345,0 7/8"-14 UNF 71,5 43,5 27
PN 13 AJ 20 90 12 8 1/2" 345,0 1.1/16" -12 UN 71,5 45,0 32
PN 16 AJ 90 16 10 5/8" 345,0 7/8"-14 UNF 87,0 54,0 27
PN 16 AJ 20 90 16 10 5/8" 345,0 1.1/16" -12 UN 87,0 54,5 32
PN 16 AJ 20 90 L 105 16 10 5/8" 345,0 1.1/16" -12 UN 87,0 105,0 32
PN 20 AJ 90 19 12 3/4" 345,0 1.1/16" -12 UN 99,0 57,5 32
PN 20 AJ 90 L 100 19 12 3/4" 345,0 1.1/16" -12 UN 99,0 100,0 32
PN 20 AJ 14 90 19 12 3/4" 345,0 1.3/16" -12 UN 108,5 69,5 36
PN 20 AJ 25 90 19 12 3/4" 275,0 1.5/16" -12 UN 99,0 58,5 41
PN 25 AJ 14 90 25 16 1" 275,0 1.3/16" -12 UN 108,5 69,5 36
PN 25 AJ 90 25 16 1" 275,0 1.5/16" -12 UN 126,0 70,5 41
PN 25 AJ 32 90 25 16 1" 200,0 1.5/8" -12 UN 126,0 72,5 50
PN 32 AJ 90 31 16 1.1/4" 200,0 1.5/8" -12 UN 150,5 86,0 50
PN 32 AJ 40 90 31 20 1.1/4" 170,0 1.7/8" -12 UN 150,5 87,0 60
PN 40 AJ 90 38 24 1.1/2" 170,0 1.7/8" -12 UN 175,5 100,5 60
PN 50 AJ 90 51 32 2" 170,0 2.1/2" -12 UN 216,5 135,0 75

Disclaimer

Despite careful checking, we cannot guarantee the accuracy of all information included on this site, and we accept no liability.
All data and information in our online catalogue are based on currently valid standards and the regulations from the employer's liability insurance association. Product safety can only be guaranteed when our assembly instructions are carefully observed. Non-adherence to these regulations can affect product operation and functioning and result in a loss of warranty. Our warranty is only valid for HANSA-FLEX products. Our products are constantly subject to further development and technical changes are therefore possible.