PN AJ 90 VA

Swage nipple, DKJ angle 90°

  • Image_1 Image_1
  • Image_2 Image_2

Properties

Application area Swage nipple for HD 100 to HD 400, KP and TE hoses
Connection 1 UN/UNF nut threads
Material Stainless steel
Online-Shop https://shop.hansa-flex.com/de/PNAJ90VA
Sealing form 1 74° inner cone
Short code DKJ
Standard ISO 8434-2

Hints

Die passende Fassung bitte nach dem Schlauchtyp auswählen.

Article Table

Product Name L2 mm S1 Betriebsdruck bar G1 Zoll DN Size
Product Name L2 mm S1 Betriebsdruck bar G1 Zoll DN Size
PN06AJ90VA 31.0 mm 17 350.0 bar 7/16"-20 UNF 1/4" 6 4
PN06AJ0890VA 31.0 mm 17 350.0 bar 1/2"-20 UNF 1/4" 6 4
PN06AJ1090VA 26.0 mm 19 350.0 bar 9/16"-18 UNF 1/4" 6 4
PN08AJ90VA 32.0 mm 17 350.0 bar 1/2"-20 UNF 5/16" 8 5
PN08AJ1090VA 36.0 mm 19 350.0 bar 9/16"-18 UNF 5/16" 8 5
PN10AJ90VA 35.0 mm 19 350.0 bar 9/16"-18 UNF 3/8" 10 6
PN10AJ1390VA 30.5 mm 22 350.0 bar 3/4" -16 UNF 3/8" 10 6
PN10AJ1690VA 38.0 mm 27 350.0 bar 7/8" -14 UNF 3/8" 10 6
PN13AJ90VA 45.0 mm 24 350.0 bar 3/4" -16 UNF 1/2" 12 8
PN13AJ1690VA 46.5 mm 27 350.0 bar 7/8" -14 UNF 1/2" 12 8
PN13AJ2090VA 55.0 mm 32 350.0 bar 1.1/16" -12 UN 1/2" 12 8
PN16AJ90VA 55.5 mm 27 350.0 bar 7/8" -14 UNF 5/8" 16 10
PN16AJ2090VA 51.5 mm 32 350.0 bar 1.1/16" -12 UN 5/8" 16 10
PN20AJ90VA 58.0 mm 32 350.0 bar 1.1/16" -12 UN 3/4" 19 12
PN20AJ2590VA 60.0 mm 41 280.0 bar 1.5/16" -12 UN 3/4" 19 12
PN25AJ90VA 73.5 mm 41 280.0 bar 1.5/16" -12 UN 1" 25 16
PN25AJ3290VA 94.5 mm 50 210.0 bar 1.5/8" -12 UN 1" 25 16
PN32AJ90VA 94.0 mm 50 210.0 bar 1.5/8" -12 UN 1.1/4" 31 16
PN32AJ4090VA 95.0 mm 55 160.0 bar 1.7/8" -12 UN 1.1/4" 31 20
PN40AJ90VA 103.0 mm 55 160.0 bar 1.7/8" -12 UN 1.1/2" 38 24
PN40AJ5090VA - - 125.0 bar 2.1/2" -12 UN 1.1/2" 38 24
PN50AJ90VA 150.0 mm 70 125.0 bar 2.1/2" -12 UN 2" 51 32
DN = Nenndurchmesser, Nennweite

Disclaimer

Despite careful checking, we cannot guarantee the accuracy of all information included on this site, and we accept no liability.
All data and information in our online catalogue are based on currently valid standards and the regulations from the employer's liability insurance association. Product safety can only be guaranteed when our assembly instructions are carefully observed. Non-adherence to these regulations can affect product operation and functioning and result in a loss of warranty. Our warranty is only valid for HANSA-FLEX products. Our products are constantly subject to further development and technical changes are therefore possible.