PN AJF 45

Swage nipple, ORFS angle 45°

  • Image_1 Image_1
  • Image_2 Image_2

Properties

Application area Swage nipple for HD 100 to HD 400, KP and TE hoses
Connection 1 UN/UNF nut threads
Material Steel
Sealing form 1 Flat seal
Short code ORFS
Standard ISO 8434-3
Surface electro galvanised

Hints

Choose the appropriate ferrule based on the hose type.

Article Table

Product Name L1 mm L2 mm S1 Operating pressure bar G1 Inches DN Size
Product Name L1 mm L2 mm S1 Operating pressure bar G1 Inches DN Size
PN 06 AJF 45 60.0 12.0 17 413.0 9/16"-18 UNF 1/4" 6 4
PN 06 AJF 45 L10 60.0 10.0 17 413.0 9/16"-18 UNF 1/4" 6 4
PN 06 AJF 10 45 61.0 13.5 22 413.0 11/16" -16 UN 1/4" 6 4
PN 08 AJF 10 45 80.0 21.0 22 413.0 11/16" -16 UN 5/16" 8 5
PN 08 AJF 10 45 L11 80.0 11.0 22 413.0 11/16" -16 UN 5/16" 8 5
PN 10 AJF 45 69.0 16.0 22 413.0 11/16" -16 UN 3/8" 10 6
PN 10 AJF 45 L11 69.0 11.0 22 413.0 11/16" -16 UN 3/8" 10 6
PN 10 AJF 13 45 69.5 16.5 24 413.0 13/16" -16 UN 3/8" 10 6
PN 13 AJF 10 45 L13 78.0 13.0 22 413.0 11/16" -16 UN 1/2" 12 8
PN 13 AJF 45 78.0 17.0 24 413.0 13/16" -16 UN 1/2" 12 8
PN 13 AJF 45 L15 78.0 15.0 24 413.0 13/16" -16 UN 1/2" 12 8
PN 13 AJF 16 45 80.5 19.5 30 413.0 1" -14 UNS 1/2" 12 8
PN 16 AJF 45 93.5 22.5 30 413.0 1" -14 UNS 5/8" 16 10
PN 16 AJF 45 L16 93.5 16.0 30 413.0 1" -14 UNS 5/8" 16 10
PN 20 AJF 16 45 L21 104.0 21.0 30 413.0 1" -14 UNS 3/4" 19 12
PN 20 AJF 45 104.0 25.0 36 413.0 1.3/16" -12 UN 3/4" 19 12
PN 20 AJF 45 L21 104.0 21.0 36 413.0 1.3/16" -12 UN 3/4" 19 12
PN 20 AJF 25 45 L21 104.0 21.0 36 413.0 1.7/16" -12 UN 3/4" 19 12
PN 25 AJF 45 130.5 27.5 41 413.0 1.7/16" -12 UN 1" 25 16
PN 25 AJF 45 L24 130.5 24.0 41 413.0 1.7/16" -12 UN 1" 25 16
PN 32 AJF 45 155.0 34.0 50 275.0 1.11/16" -12 UN 1.1/4" 31 20
PN 40 AJF 45 177.0 38.0 60 275.0 2" -12 UN 1.1/2" 38 24
DN = Nenndurchmesser, Nennweite

Disclaimer

Despite careful checking, we cannot guarantee the accuracy of all information included on this site, and we accept no liability.
All data and information in our online catalogue are based on currently valid standards and the regulations from the employer's liability insurance association. Product safety can only be guaranteed when our assembly instructions are carefully observed. Non-adherence to these regulations can affect product operation and functioning and result in a loss of warranty. Our warranty is only valid for HANSA-FLEX products. Our products are constantly subject to further development and technical changes are therefore possible.