PN AJF SK

Swage nipple, ORFS

  • Image_1 Image_1
  • Image_2 Image_2

Properties

Application area Swage nipple for HD 100 to HD 400, KP and TE hoses
Besondere Merkmale with holder hexagon
Connection 1 UN/UNF nut threads
Material Steel
Sealing form 1 Flat seal
Short code ORFS
Standard ISO 8434-3
Surface electro galvanised

Hints

Die passende Fassung bitte nach dem Schlauchtyp auswählen.

Article Table

Product Name L1 mm S1 Betriebsdruck bar SW mm G1 Zoll DN Size
Product Name L1 mm S1 Betriebsdruck bar SW mm G1 Zoll DN Size
PN06AJFSK 58.0 mm 19 413.0 bar 14 mm 9/16"-18 UNF 1/4" 6 4
PN06AJF10SK 61.5 mm 22 413.0 bar 17 mm 11/16" -16 UN 1/4" 6 4
PN08AJF10SK 61.5 mm 22 413.0 bar 17 mm 11/16" -16 UN 5/16" 8 5
PN10AJFSK 65.0 mm 22 413.0 bar 17 mm 11/16" -16 UN 3/8" 10 6
PN10AJF13SK 67.5 mm 27 413.0 bar 19 mm 13/16" -16 UN 3/8" 10 6
PN13AJF10SK 74.0 mm 19 413.0 bar 22 mm 11/16" -16 UN 1/2" 12 8
PN13AJFSK 68.5 mm 27 413.0 bar 19 mm 13/16" -16 UN 1/2" 12 8
PN13AJF16SK 74.0 mm 30 413.0 bar 24 mm 1" -14 UNS 1/2" 12 8
PN13AJF20SK 79.5 mm 36 413.0 bar 30 mm 1.3/16" -12 UN 1/2" 12 8
PN16AJFSK 78.5 mm 30 413.0 bar 24 mm 1" -14 UNS 5/8" 16 10
PN16AJF20SK 83.5 mm 36 413.0 bar 30 mm 1.3/16" -12 UN 5/8" 16 10
PN20AJF16SK 89.0 mm 30 413.0 bar 27 mm 1" -14 UNS 3/4" 19 12
PN20AJFSK 88.5 mm 36 413.0 bar 30 mm 1.3/16" -12 UN 3/4" 19 12
PN20AJF25SK 91.5 mm 41 413.0 bar 36 mm 1.7/16" -12 UN 3/4" 19 12
PN25AJF20SK 111.5 mm 36 413.0 bar 36 mm 1.3/16" -12 UN 1" 25 16
PN25AJFSK 97.5 mm 41 413.0 bar 36 mm 1.7/16" -12 UN 1" 25 16
PN25AJF32SK 111.5 mm 41 275.0 bar 50 mm 1.11/16" -12 UN 1" 25 16
PN32AJFSK 107.0 mm 50 275.0 bar 41 mm 1.11/16" -12 UN 1.1/4" 31 20
PN40AJFSK 115.5 mm 60 275.0 bar 50 mm 2" -12 UN 1.1/2" 38 24
DN = Nenndurchmesser, Nennweite

Disclaimer

Despite careful checking, we cannot guarantee the accuracy of all information included on this site, and we accept no liability.
All data and information in our online catalogue are based on currently valid standards and the regulations from the employer's liability insurance association. Product safety can only be guaranteed when our assembly instructions are carefully observed. Non-adherence to these regulations can affect product operation and functioning and result in a loss of warranty. Our warranty is only valid for HANSA-FLEX products. Our products are constantly subject to further development and technical changes are therefore possible.