PN AJ VA

Swage nipple, DKJ



Properties

Connection 1 UN/UNF nut threads
Sealing form 1 74° inner cone
Application Swage nipple for HD 100 to HD 400, KP and TE hoses
Standard ISO 8434-2
Short code DKJ
Material Stainless steel

Hints

Choose the appropriate ferrule based on the hose type.

Article Table

Product Name DN Size Inches Operating pressure bar G1 S1
Product Name DN Size Inches Operating pressure bar G1 S1
PN 06 AJ 08 VA 6 4 1/4" 350,0 1/2"-20 UNF 17
PN 06 AJ VA 6 4 1/4" 350,0 7/16"-20 UNF 17
PN 06 AJ 10 VA 6 4 1/4" 350,0 9/16"-18 UNF 19
PN 06 AJ 13 VA 6 4 1/4" 350,0 3/4"-16 UNF 24
PN 08 AJ VA 8 5 5/16" 350,0 1/2"-20 UNF 17
PN 08 AJ 10 VA 8 5 5/16" 350,0 9/16"-18 UNF 19
PN 08 AJ 13 VA 8 5 5/16" 350,0 3/4"-16 UNF 24
PN 10 AJ VA 10 6 3/8" 350,0 9/16"-18 UNF 19
PN 10 AJ 13 VA 10 6 3/8" 350,0 3/4"-16 UNF 24
PN 10 AJ 16 VA 10 6 3/8" 350,0 7/8"-14 UNF 27
PN 13 AJ 10 VA 12 8 1/2" 350,0 9/16"-18 UNF 19
PN 13 AJ VA 12 8 1/2" 350,0 3/4"-16 UNF 24
PN 13 AJ 16 VA 12 8 1/2" 350,0 7/8"-14 UNF 27
PN 13 AJ 20 VA 12 8 1/2" 350,0 1.1/16" -12 UN 32
PN 16 AJ 13 VA 16 10 5/8" 350,0 3/4"-16 UNF 24
PN 16 AJ VA 16 10 5/8" 350,0 7/8"-14 UNF 27
PN 16 AJ 20 VA 16 10 5/8" 350,0 1.1/16" -12 UN 32
PN 16 AJ 25 VA 16 10 5/8" 280,0 1.5/16" -12 UN 41
PN 20 AJ 13 VA 19 12 3/4" 350,0 3/4"-16 UNF 24
PN 20 AJ 16 VA 19 12 3/4" 350,0 7/8"-14 UNF 27
PN 20 AJ VA 19 12 3/4" 350,0 1.1/16" -12 UN 32
PN 20 AJ 25 VA 19 12 3/4" 280,0 1.5/16" -12 UN 41
PN 25 AJ 20 VA 25 16 1" 280,0 1.1/16" -12 UN 32
PN 25 AJ VA 25 16 1" 280,0 1.5/16" -12 UN 41
PN 25 AJ 32 VA 25 16 1" 210,0 1.5/8" -12 UN 50
PN 32 AJ VA 31 20 1.1/4" 210,0 1.5/8" -12 UN 50
PN 32 AJ 40 VA 31 20 1.1/4" 160,0 1.7/8" -12 UN 55
PN 40 AJ VA 38 24 1.1/2" 160,0 1.7/8" -12 UN 55
PN 40 AJ 50 VA 38 24 1.1/2" 125,0 2.1/2" -12 UN 70
PN 50 AJ VA 51 32 2" 125,0 2.1/2" -12 UN 70

Disclaimer

Despite careful checking, we cannot guarantee the accuracy of all information included on this site, and we accept no liability.
All data and information in our online catalogue are based on currently valid standards and the regulations from the employer's liability insurance association. Product safety can only be guaranteed when our assembly instructions are carefully observed. Non-adherence to these regulations can affect product operation and functioning and result in a loss of warranty. Our warranty is only valid for HANSA-FLEX products. Our products are constantly subject to further development and technical changes are therefore possible.