PN AOB

Swage nipple, DKOR

  • Image_1 Image_1
  • Image_2 Image_2

Properties

Application area Swage nipple for HD 100 to HD 400, KP and TE hoses
Connection 1 BSP nut thread
Material Steel
Sealing form 1 60° outer cone with O-ring
Short code DKOR
Standard ISO 8434-6
BS 5200
Surface electro galvanised

Hints

Choose the appropriate ferrule based on the hose type.

Article Table

Product Name L1 mm S1 Operating pressure bar G1 Inches DN OR Size
Product Name L1 mm S1 Operating pressure bar G1 Inches DN OR Size
PN 06 AOB 44.5 19 400.0 G 1/4" -19 1/4" 6 6.0 x 1.0 4
PN 10 AOB 48.5 22 400.0 G 3/8" -19 3/8" 10 8.1 x 1.6 6
PN 13 AOB 51.0 27 350.0 G 1/2" -14 1/2" 12 12.1 x 1.6 8
PN 16 AOB 54.0 30 350.0 G 5/8" -14 5/8" 16 13.1 x 1.6 10
PN 20 AOB 63.5 32 315.0 G 3/4" -14 3/4" 19 17.1 x 1.6 12
PN 25 AOB 75.5 38 250.0 G 1" -11 1" 25 22.1 x 1.6 16
PN 25 AOB 32 78.0 50 250.0 G 1.1/4" -11 1" 25 29.1 x 1.6 16
PN 32 AOB 87.0 50 250.0 G 1.1/4" -11 1.1/4" 31 29.1 x 1.6 20
PN 32 AOB 40 88.5 55 210.0 G 1.1/2" -11 1.1/4" 31 35.1 x 1.6 20
PN 40 AOB 92.0 55 210.0 G 1.1/2" -11 1.1/2" 38 35.1 x 1.6 24
PN 40 AOB 50 97.0 70 210.0 G 2" -11 1.1/2" 38 48.1 x 1.6 24
PN 50 AOB 110.0 70 210.0 G 2" -11 2" 51 48.1 x 1.6 32
DN = Nenndurchmesser, Nennweite

Disclaimer

Despite careful checking, we cannot guarantee the accuracy of all information included on this site, and we accept no liability.
All data and information in our online catalogue are based on currently valid standards and the regulations from the employer's liability insurance association. Product safety can only be guaranteed when our assembly instructions are carefully observed. Non-adherence to these regulations can affect product operation and functioning and result in a loss of warranty. Our warranty is only valid for HANSA-FLEX products. Our products are constantly subject to further development and technical changes are therefore possible.