PN AOB 45

Swage nipple, DKOR angle 45°

  • Image_1 Image_1
  • Image_2 Image_2

Properties

Application area Swage nipple for HD 100 to HD 400, KP and TE hoses
Connection 1 BSP nut thread
Material Steel
Sealing form 1 60° outer cone with O-ring
Short code DKOR
Standard ISO 8434-6
BS 5200
Surface electro galvanised

Hints

Choose the appropriate ferrule based on the hose type.

Article Table

Product Name L1 mm L2 mm S1 OR Operating pressure bar G1 DN Inches Size
Product Name L1 mm L2 mm S1 OR Operating pressure bar G1 DN Inches Size
PN 06 AOB 45 60.5 12.5 Swage nipple, DKOR angle 45°; Steel; electro galvanised 19 6.0 x 1.0 400.0 G 1/4" -19 6 1/4" 4
PN 10 AOB 45 69.5 16.5 Swage nipple, DKOR angle 45°; Steel; electro galvanised 22 8.1 x 1.6 400.0 G 3/8" -19 10 3/8" 6
PN 13 AOB 45 78.5 17.5 Swage nipple, DKOR angle 45°; Steel; electro galvanised 27 12.1 x 1.6 350.0 G 1/2" -14 12 1/2" 8
PN 16 AOB 45 96.0 24.5 Swage nipple, DKOR angle 45°; Steel; electro galvanised 30 13.1 x 1.6 350.0 G 5/8" -14 16 5/8" 10
PN 20 AOB 45 108.0 28.5 Swage nipple, DKOR angle 45°; Steel; electro galvanised 32 17.1 x 1.6 315.0 G 3/4" -14 19 3/4" 12
PN 25 AOB 45 137.0 35.0 Swage nipple, DKOR angle 45°; Steel; electro galvanised 38 22.1 x 1.6 250.0 G 1" -11 25 1" 16
PN 25 AOB 32 45 134.5 32.0 Swage nipple, DKOR angle 45°; Steel; electro galvanised 50 29.1 x 1.6 250.0 G 1.1/4" -11 25 1" 16
PN 32 AOB 45 165.0 45.5 Swage nipple, DKOR angle 45°; Steel; electro galvanised 50 29.1 x 1.6 250.0 G 1.1/4" -11 31 1.1/4" 20
PN 32 AOB 40 45 165.0 45.0 Swage nipple, DKOR angle 45°; Steel; electro galvanised 55 35.1 x 1.6 - G 1.1/2" -11 31 1.1/4" 20
PN 40 AOB 45 187.5 49.5 Swage nipple, DKOR angle 45°; Steel; electro galvanised 55 35.1 x 1.6 210.0 G 1.1/2" -11 38 1.1/2" 24
PN 40 AOB 50 45 189.5 51.5 Swage nipple, DKOR angle 45°; Steel; electro galvanised 70 48.1 x 1.6 210.0 G 2" -11 38 1.1/2" 24
PN 50 AOB 45 231.5 67.0 Swage nipple, DKOR angle 45°; Steel; electro galvanised 70 48.1 x 1.6 210.0 G 2" -11 51 2" 32
DN = Nominal diameter, nominal width

Disclaimer

Despite careful checking, we cannot guarantee the accuracy of all information included on this site, and we accept no liability.
All data and information in our online catalogue are based on currently valid standards and the regulations from the employer's liability insurance association. Product safety can only be guaranteed when our assembly instructions are carefully observed. Non-adherence to these regulations can affect product operation and functioning and result in a loss of warranty. Our warranty is only valid for HANSA-FLEX products. Our products are constantly subject to further development and technical changes are therefore possible.