PN AOL

Swage nipple, DKOL

  • Image_1 Image_1
  • Image_2 Image_2

Properties

Application area Swage nipple for HD 100 to HD 400, KP and TE hoses
Connection 1 metric nut thread
Material Steel
Sealing form 1 24° outer cone with O-ring
Series light
Short code DKOL
Standard ISO 8434-1
Surface electro galvanised

Hints

Choose the appropriate ferrule based on the hose type.

Article Table

Product Name L1 mm S1 Operating pressure bar G1 for external pipe Ø mm Inches DN OR Size
Product Name L1 mm S1 Operating pressure bar G1 for external pipe Ø mm Inches DN OR Size
PN 04 AOL 45.5 14 410.0 M 12 x 1,5 6 3/16" 5 4.0 x 1.5 3
PN 04 AOL 06 45.5 17 410.0 M 14 x 1.5 8 3/16" 5 6.0 x 1.5 3
PN 04 AOL 08 46.0 19 350.0 M 16 x 1.5 10 3/16" 5 7.5 x 1.5 3
PN 06 AOL 04 46.5 14 410.0 M 12 x 1,5 6 1/4" 6 4.0 x 1.5 4
PN 06 AOL 52.0 17 410.0 M 14 x 1.5 8 1/4" 6 6.0 x 1.5 4
PN 06 AOL 08 52.0 19 350.0 M 16 x 1.5 10 1/4" 6 7.5 x 1.5 4
PN 06 AOL 10 53.0 22 330.0 M 18 x 1.5 12 1/4" 6 9.0 x 1.5 4
PN 08 AOL 06 47.0 17 350.0 M 14 x 1.5 8 5/16" 8 6.0 x 1.5 5
PN 08 AOL 52.0 19 350.0 M 16 x 1.5 10 5/16" 8 7.5 x 1.5 5
PN 08 AOL 10 53.0 22 330.0 M 18 x 1.5 12 5/16" 8 9.0 x 1.5 5
PN 10 AOL 06 50.5 17 330.0 M 14 x 1.5 8 3/8" 10 6.0 x 1.5 6
PN 10 AOL 08 51.5 19 330.0 M 16 x 1.5 10 3/8" 10 7.5 x 1.5 6
PN 10 AOL 54.5 22 330.0 M 18 x 1.5 12 3/8" 10 9.0 x 1.5 6
PN 10 AOL 13 56.5 27 275.0 M 22 x 1.5 15 3/8" 10 12.0 x 2.0 6
PN 13 AOL 10 54.5 22 275.0 M 18 x 1.5 12 1/2" 12 9.0 x 1.5 8
PN 13 AOL 57.5 27 275.0 M 22 x 1.5 15 1/2" 12 12.0 x 2.0 8
PN 13 AOL 16 59.0 32 250.0 M 26 x 1.5 18 1/2" 12 15.0 x 2.0 8
PN 16 AOL 13 58.0 27 250.0 M 22 x 1.5 15 5/8" 16 12.0 x 2.0 10
PN 16 AOL 64.0 32 250.0 M 26 x 1.5 18 5/8" 16 15.0 x 2.0 10
PN 16 AOL 20 64.5 36 215.0 M 30 x 2 22 5/8" 16 20.0 x 2.0 10
PN 20 AOL 16 66.5 32 215.0 M 26 x 1.5 18 3/4" 19 15.0 x 2.0 12
PN 20 AOL 71.0 36 215.0 M 30 x 2 22 3/4" 19 20.0 x 2.0 12
PN 20 AOL 25 73.0 41 165.0 M 36 x 2 28 3/4" 19 26.0 x 2.0 12
PN 25 AOL 20 75.5 36 165.0 M 30 x 2 22 1" 25 20.0 x 2.0 16
PN 25 AOL 81.0 41 165.0 M 36 x 2 28 1" 25 26.0 x 2.0 16
PN 25 AOL 32 85.5 50 160.0 M 45 x 2 35 1" 25 32.0 x 2.5 16
PN 32 AOL 25 87.0 41 160.0 M 36 x 2 28 1.1/4" 31 26.0 x 2.0 20
PN 32 AOL 94.5 50 160.0 M 45 x 2 35 1.1/4" 31 32.0 x 2.5 20
PN 32 AOL 40 94.5 60 160.0 M 52 x 2 42 1.1/4" 31 38.0 x 2.5 20
PN 40 AOL 32 94.0 50 160.0 M 45 x 2 35 1.1/2" 38 32.0 x 2.5 24
PN 40 AOL 98.0 60 160.0 M 52 x 2 42 1.1/2" 38 38.0 x 2.5 24
PN 50 AOL 40 112.5 60 160.0 M 52 x 2 42 2" 51 38.0 x 2.5 32
DN = Nenndurchmesser, Nennweite

Disclaimer

Despite careful checking, we cannot guarantee the accuracy of all information included on this site, and we accept no liability.
All data and information in our online catalogue are based on currently valid standards and the regulations from the employer's liability insurance association. Product safety can only be guaranteed when our assembly instructions are carefully observed. Non-adherence to these regulations can affect product operation and functioning and result in a loss of warranty. Our warranty is only valid for HANSA-FLEX products. Our products are constantly subject to further development and technical changes are therefore possible.