PN AOL 90 VA

Swage nipple, DKOL angle 90°

  • Image_1 Image_1
  • Image_2 Image_2

Properties

Application area Swage nipple for HD 100 to HD 400, KP and TE hoses
Connection 1 metric nut thread
Material Stainless steel
Sealing form 1 24° outer cone with O-ring
Series light
Short code DKOL
Standard ISO 8434-1

Hints

Choose the appropriate ferrule based on the hose type.

Article Table

Product Name L1 mm L2 mm S1 G1 for external pipe Ø mm Inches DN OR Size
Product Name L1 mm L2 mm S1 G1 for external pipe Ø mm Inches DN OR Size
PN 06 AOL 04 90 VA 57.8 30.5 14 M 12 x 1,5 6 1/4" 6 4.0 x 1.5 4
PN 06 AOL 90 VA 57.8 29.5 17 M 14 x 1.5 8 1/4" 6 6.0 x 1.5 4
PN 06 AOL 08 90 VA 58.3 29.5 19 M 16 x 1.5 10 1/4" 6 7.5 x 1.5 4
PN 06 AOL 10 90 VA 58.8 33.5 22 M 18 x 1.5 12 1/4" 6 9.0 x 1.5 4
PN 08 AOL 06 90 VA 64.8 47.0 17 M 14 x 1.5 8 5/16" 8 6.0 x 1.5 5
PN 08 AOL 90 VA 61.3 39.0 19 M 16 x 1.5 10 5/16" 8 7.5 x 1.5 5
PN 08 AOL 10 90 VA 64.3 37.0 22 M 18 x 1.5 12 5/16" 8 9.0 x 1.5 5
PN 10 AOL 08 90 VA 64.8 40.5 19 M 16 x 1.5 10 3/8" 10 7.5 x 1.5 6
PN 10 AOL 90 VA 63.8 38.0 22 M 18 x 1.5 12 3/8" 10 9.0 x 1.5 6
PN 10 AOL 13 90 VA 72.3 41.5 27 M 22 x 1.5 15 3/8" 10 12.0 x 2.0 6
PN 13 AOL 10 90 VA 76.8 53.0 22 M 18 x 1.5 12 1/2" 12 9.0 x 1.5 8
PN 13 AOL 90 VA 75.8 43.0 27 M 22 x 1.5 15 1/2" 12 12.0 x 2.0 8
PN 13 AOL 16 90 VA 78.3 51.0 32 M 26 x 1.5 18 1/2" 12 15.0 x 2.0 8
PN 16 AOL 90 VA 90.0 52.0 32 M 26 x 1.5 18 5/8" 16 15.0 x 2.0 10
PN 16 AOL 20 90 VA 111.0 63.5 36 M 30 x 2 22 5/8" 16 20.0 x 2.0 10
PN 20 AOL 90 VA 98.0 58.0 36 M 30 x 2 22 3/4" 19 20.0 x 2.0 12
PN 20 AOL 25 90 VA 107.0 62.5 41 M 36 x 2 28 3/4" 19 26.0 x 2.0 12
PN 25 AOL 90 VA 124.5 70.0 41 M 36 x 2 28 1" 25 26.0 x 2.0 16
PN 32 AOL 90 VA 149.0 85.0 50 M 45 x 2 35 1.1/4" 31 32.0 x 2.5 20
PN 40 AOL 90 VA 166.0 103.0 60 M 52 x 2 42 1.1/2" 38 38.0 x 2.5 24
DN = Nenndurchmesser, Nennweite

Order hints

Seals of NBR
FPM (Viton) on request

Disclaimer

Despite careful checking, we cannot guarantee the accuracy of all information included on this site, and we accept no liability.
All data and information in our online catalogue are based on currently valid standards and the regulations from the employer's liability insurance association. Product safety can only be guaranteed when our assembly instructions are carefully observed. Non-adherence to these regulations can affect product operation and functioning and result in a loss of warranty. Our warranty is only valid for HANSA-FLEX products. Our products are constantly subject to further development and technical changes are therefore possible.