PN AOS 45

Swage nipple, DKOS angle 45°

  • Image_1 Image_1
  • Image_2 Image_2

Properties

Application area Swage nipple for HD 100 to HD 400, KP and TE hoses
Connection 1 metric nut thread
Material Steel
Sealing form 1 24° outer cone with O-ring
Series heavy
Short code DKOS
Standard ISO 8434-1
Surface electro galvanised

Hints

Choose the appropriate ferrule based on the hose type.

Article Table

Product Name L1 mm L2 mm S1 Operating pressure bar G1 for external pipe Ø mm Inches DN OR Size
Product Name L1 mm L2 mm S1 Operating pressure bar G1 for external pipe Ø mm Inches DN OR Size
PN 04 AOS 45 56.5 15.5 19 630.0 M 16 x 1.5 8 3/16" 5 6.0 x 1.5 3
PN 04 AOS 06 45 58.0 17.0 22 630.0 M 18 x 1.5 10 3/16" 5 7.0 x 2.0 3
PN 06 AOS 03 45 64.5 16.5 17 630.0 M 14 x 1.5 6 1/4" 6 4.0 x 1.5 4
PN 06 AOS 04 45 64.5 16.5 19 630.0 M 16 x 1.5 8 1/4" 6 6.0 x 1.5 4
PN 06 AOS 45 65.0 17.0 22 630.0 M 18 x 1.5 10 1/4" 6 7.5 x 1.5 4
PN 06 AOS 08 45 67.5 18.0 24 630.0 M 20 x 1.5 12 1/4" 6 9.0 x 1.5 4
PN 08 AOS 06 45 64.0 17.0 22 630.0 M 18 x 1.5 10 5/16" 8 7.5 x 1.5 5
PN 08 AOS 45 67.5 18.0 24 630.0 M 20 x 1.5 12 5/16" 8 9.0 x 1.5 5
PN 10 AOS 06 45 72.0 21.0 22 630.0 M 18 x 1.5 10 3/8" 10 7.5 x 1.5 6
PN 10 AOS 08 45 73.0 20.0 24 630.0 M 20 x 1.5 12 3/8" 10 9.0 x 1.5 6
PN 10 AOS 45 73.5 20.5 27 630.0 M 22 x 1.5 14 3/8" 10 10.0 x 2.0 6
PN 10 AOS 13 45 81.0 21.0 30 420.0 M 24 x 1.5 16 3/8" 10 12.0 x 2.0 6
PN 13 AOS 10 45 81.0 27.5 27 420.0 M 22 x 1.5 14 1/2" 12 10.0 x 2.0 8
PN 13 AOS 45 82.0 21.0 30 420.0 M 24 x 1.5 16 1/2" 12 12.0 x 2.0 8
PN 16 AOS 13 45 85.5 27.5 30 420.0 M 24 x 1.5 16 5/8" 16 12.0 x 2.0 10
PN 16 AOS 45 98.5 27.5 36 420.0 M 30 x 2 20 5/8" 16 16.0 x 2.5 10
PN 16 AOS 20 45 103.0 30.5 46 420.0 M 36 x 2 25 5/8" 16 20.0 x 2.5 10
PN 20 AOS 16 45 109.0 30.0 36 420.0 M 30 x 2 20 3/4" 19 16.0 x 2.5 12
PN 20 AOS 45 109.5 30.5 46 420.0 M 36 x 2 25 3/4" 19 20.0 x 2.5 12
PN 20 AOS 45 SW41 109.5 30.5 41 420.0 M 36 x 2 25 3/4" 19 20.0 x 2.5 12
PN 25 AOS 20 45 141.5 39.5 46 420.0 M 36 x 2 25 1" 25 20.0 x 2.5 16
PN 25 AOS 45 135.5 33.0 50 420.0 M 42 x 2 30 1" 25 25.0 x 2.5 16
PN 32 AOS 45 161.5 40.5 60 345.0 M 52 x 2 38 1.1/4" 31 33.0 x 2.5 20
PN 40 AOS 32 45 165.0 40.5 60 345.0 M 52 x 2 38 1.1/2" 38 33.0 x 2.5 24
DN = Nenndurchmesser, Nennweite

Disclaimer

Despite careful checking, we cannot guarantee the accuracy of all information included on this site, and we accept no liability.
All data and information in our online catalogue are based on currently valid standards and the regulations from the employer's liability insurance association. Product safety can only be guaranteed when our assembly instructions are carefully observed. Non-adherence to these regulations can affect product operation and functioning and result in a loss of warranty. Our warranty is only valid for HANSA-FLEX products. Our products are constantly subject to further development and technical changes are therefore possible.