PN AOS 45 VA

Swage nipple, DKOS angle 45°

  • Image_1 Image_1
  • Image_2 Image_2

Properties

Application area Swage nipple for HD 100 to HD 400, KP and TE hoses
Connection 1 metric nut thread
Material Stainless steel
Sealing form 1 24° outer cone with O-ring
Series heavy
Short code DKOS
Standard ISO 8434-1

Hints

Die passende Fassung bitte nach dem Schlauchtyp auswählen.

Article Table

Product Name L1 mm L2 mm S1 G1 für Rohr-Außen-Ø mm Zoll DN OR Size
Product Name L1 mm L2 mm S1 G1 für Rohr-Außen-Ø mm Zoll DN OR Size
PN06AOS0345VA 66.8 mm 15.0 mm 17 M 14 x 1.5 6 mm 1/4" 6 4.0 x 1.5 4
PN06AOS0445VA 68.3 mm 16.5 mm 19 M 16 x 1.5 8 mm 1/4" 6 6.0 x 1.5 4
PN06AOS45VA 68.3 mm 16.5 mm 22 M 18 x 1.5 10 mm 1/4" 6 7.5 x 1.5 4
PN06AOS0845VA 71.8 mm 19.5 mm 24 M 20 x 1.5 12 mm 1/4" 6 9.0 x 1.5 4
PN08AOS0445VA 74.3 mm 19.0 mm 19 M 16 x 1.5 8 mm 5/16" 8 6.0 x 1.5 5
PN08AOS0645VA 74.3 mm 19.0 mm 22 M 18 x 1.5 10 mm 5/16" 8 7.5 x 1.5 5
PN08AOS45VA 74.3 mm 19.0 mm 24 M 20 x 1.5 12 mm 5/16" 8 9.0 x 1.5 5
PN10AOS0645VA 75.3 mm 20.0 mm 22 M 18 x 1.5 10 mm 3/8" 10 7.5 x 1.5 6
PN10AOS0845VA 73.3 mm 18.5 mm 24 M 20 x 1.5 12 mm 3/8" 10 9.0 x 1.5 6
PN10AOS45VA 84.3 mm 23.5 mm 27 M 22 x 1.5 14 mm 3/8" 10 10.0 x 2.0 6
PN10AOS1345VA 85.3 mm 24.0 mm 30 M 24 x 1.5 16 mm 3/8" 10 12.0 x 2.0 6
PN13AOS0845VA 94.3 mm 27.5 mm 24 M 20 x 1.5 12 mm 1/2" 12 9.0 x 1.5 8
PN13AOS45VA 88.8 mm 25.0 mm 30 M 24 x 1.5 16 mm 1/2" 12 12.0 x 2.0 8
PN13AOS1645VA 96.8 mm 32.0 mm 36 M 30 x 2 20 mm 1/2" 12 16.3 x 2.4 8
PN16AOS45VA 103.0 mm 28.0 mm 36 M 30 x 2 20 mm 5/8" 16 16.3 x 2.4 10
PN20AOS1645VA 108.5 mm 27.0 mm 36 M 30 x 2 20 mm 3/4" 19 16.3 x 2.4 12
PN20AOS45VA 120.0 mm 37.0 mm 46 M 36 x 2 25 mm 3/4" 19 20.3 x 2.4 12
PN20AOS2545VA 120.0 mm 37.0 mm 50 M 42 x 2 30 mm 3/4" 19 25.0 x 2.5 12
PN25AOS2045VA 140.5 mm 39.0 mm 46 M 36 x 2 25 mm 1" 25 20.3 x 2.4 16
PN25AOS45VA 140.5 mm 39.5 mm 50 M 42 x 2 30 mm 1" 25 25.3 x 2.4 16
PN25AOS3245VA 140.5 mm 39.5 mm 60 M 52 x 2 38 mm 1" 25 33.3 x 2.4 16
PN32AOS45VA 178.0 mm 47.0 mm 60 M 52 x 2 38 mm 1.1/4" 31 33.3 x 2.4 20
DN = Nenndurchmesser, Nennweite

Order hints

Dichtungen aus NBR, FPM (Viton) auf Anfrage

Disclaimer

Despite careful checking, we cannot guarantee the accuracy of all information included on this site, and we accept no liability.
All data and information in our online catalogue are based on currently valid standards and the regulations from the employer's liability insurance association. Product safety can only be guaranteed when our assembly instructions are carefully observed. Non-adherence to these regulations can affect product operation and functioning and result in a loss of warranty. Our warranty is only valid for HANSA-FLEX products. Our products are constantly subject to further development and technical changes are therefore possible.