PN AOS 90 VA

Swage nipple, DKOS angle 90°



Properties

Connection 1 metric nut thread
Series heavy
Sealing form 1 24° outer cone with O-ring
Application Swage nipple for HD 100 to HD 400, KP and TE hoses
Standard ISO 8434-1
Short code DKOS
Material Stainless steel

Hints

Choose the appropriate ferrule based on the hose type.

Article Table

Product Name DN Size Inches G1 for external pipe Ø mm L1 mm L2 mm S1 OR
Product Name DN Size Inches G1 for external pipe Ø mm L1 mm L2 mm S1 OR
PN 06 AOS 03 90 VA 6 4 1/4" M 14 x 1.5 6 57,8 34,0 17 4.0 x 1.5
PN 06 AOS 04 90 VA 6 4 1/4" M 16 x 1.5 8 57,8 32,5 19 6.0 x 1.5
PN 06 AOS 90 VA 6 4 1/4" M 18 x 1.5 10 58,3 33,5 22 7.5 x 1.5
PN 06 AOS 08 90 VA 6 4 1/4" M 20 x 1.5 12 58,5 33,5 24 9.0 x 1.5
PN 08 AOS 04 90 VA 8 5 5/16" M 16 x 1.5 8 65,8 40,5 19 6.0 x 1.5
PN 08 AOS 06 90 VA 8 5 5/16" M 18 x 1.5 10 61,3 39,0 22 7.5 x 1.5
PN 08 AOS 90 VA 8 5 5/16" M 20 x 1.5 12 64,3 37,0 24 9.0 x 1.5
PN 10 AOS 06 90 VA 10 6 3/8" M 18 x 1.5 10 64,8 38,5 22 7.5 x 1.5
PN 10 AOS 08 90 VA 10 6 3/8" M 20 x 1.5 12 63,8 38,0 24 9.0 x 1.5
PN 10 AOS 90 VA 10 6 3/8" M 22 x 1.5 14 71,8 42,0 27 10.0 x 2.0
PN 10 AOS 13 90 VA 10 6 3/8" M 24 x 1.5 16 72,8 42,5 30 12.0 x 2.0
PN 13 AOS 08 90 VA 12 8 1/2" M 20 x 1.5 12 76,8 53,0 24 9.0 x 1.5
PN 13 AOS 90 VA 12 8 1/2" M 24 x 1.5 16 75,8 45,5 30 12.0 x 2.0
PN 13 AOS 16 90 VA 12 8 1/2" M 30 x 2 20 77,8 59,0 36 16.3 x 2.4
PN 16 AOS 90 VA 16 10 5/8" M 30 x 2 20 93,0 51,0 36 16.3 x 2.4
PN 20 AOS 16 90 VA 19 12 3/4" M 30 x 2 20 98,5 58,5 36 16.3 x 2.4
PN 20 AOS 90 VA 19 12 3/4" M 36 x 2 25 109,0 64,0 46 20.3 x 2.4
PN 20 AOS 25 90 VA 19 12 3/4" M 42 x 2 30 109,0 64,0 50 25.3 x 2.4
PN 25 AOS 20 90 VA 25 16 1" M 36 x 2 25 121,5 79,0 46 20.3 x 2.4
PN 25 AOS 90 VA 25 16 1" M 42 x 2 30 127,5 84,0 50 25.3 x 2.4
PN 25 AOS 32 90 VA 25 16 1" M 52 x 2 38 127,5 84,0 60 33.3 x 2.4
PN 32 AOS 90 VA 31 20 1.1/4" M 52 x 2 38 163,0 100,0 60 33.3 x 2.4

Order hints

Seals of NBR
FPM (Viton) on request

Disclaimer

Despite careful checking, we cannot guarantee the accuracy of all information included on this site, and we accept no liability.
All data and information in our online catalogue are based on currently valid standards and the regulations from the employer's liability insurance association. Product safety can only be guaranteed when our assembly instructions are carefully observed. Non-adherence to these regulations can affect product operation and functioning and result in a loss of warranty. Our warranty is only valid for HANSA-FLEX products. Our products are constantly subject to further development and technical changes are therefore possible.