PN AR

Swage nipple, DKR-Flat

  • Image_1 Image_1
  • Image_2 Image_2

Properties

Application area Swage nipple for HD 100 to HD 400, KP and TE hoses
Connection 1 BSP nut thread
Material Steel
Online-Shop https://shop.hansa-flex.com/de/PNAR
Sealing form 1 Flat seal
Short code DKR flat
Surface electro galvanised

Hints

Die passende Fassung bitte nach dem Schlauchtyp auswählen.
LM = Lange Mutter

Article Table

Product Name L1 mm S1 Betriebsdruck bar G1 Zoll DN Size
Product Name L1 mm S1 Betriebsdruck bar G1 Zoll DN Size
PN06AR02 43.0 mm 14 350.0 bar G 1/8" -28 1/4" 6 4
PN06AR 43.5 mm 19 350.0 bar G 1/4" -19 1/4" 6 4
PN06AR10 44.5 mm 22 350.0 bar G 3/8" -19 1/4" 6 4
PN08AR06 44.0 mm 19 350.0 bar G 1/4" -19 5/16" 8 5
PN08AR10 44.5 mm 22 350.0 bar G 3/8" -19 5/16" 8 5
PN08AR13 46.5 mm 27 315.0 bar G 1/2" -14 5/16" 8 5
PN10AR06 46.0 mm 19 350.0 bar G 1/4" -19 3/8" 10 6
PN10AR 47.0 mm 22 350.0 bar G 3/8" -19 3/8" 10 6
PN10AR13 48.0 mm 27 315.0 bar G 1/2" -14 3/8" 10 6
PN10AR13LM 48.0 mm 27 315.0 bar G 1/2" -14 3/8" 10 6
PN13AR10 48.5 mm 22 315.0 bar G 3/8" -19 1/2" 12 8
PN13AR 50.0 mm 27 315.0 bar G 1/2" -14 1/2" 12 8
PN13AR16 49.5 mm 30 315.0 bar G 5/8" -14 1/2" 12 8
PN13AR20 49.5 mm 32 250.0 bar G 3/4" -14 1/2" 12 8
PN16AR 55.0 mm 30 315.0 bar G 5/8" -14 5/8" 16 10
PN16AR20 54.0 mm 32 250.0 bar G 3/4" -14 5/8" 16 10
PN16AR25 56.5 mm 41 200.0 bar G 1" -11 5/8" 16 10
PN20AR 61.5 mm 32 250.0 bar G 3/4" -14 3/4" 19 12
PN20AR25 63.0 mm 41 200.0 bar G 1" -11 3/4" 19 12
PN20AR32 66.5 mm 50 160.0 bar G 1.1/4" -11 3/4" 19 12
PN25AR 72.0 mm 38 200.0 bar G 1" -11 1" 25 16
PN25AR32 74.5 mm 50 160.0 bar G 1.1/4" -11 1" 25 16
PN32AR 84.5 mm 50 160.0 bar G 1.1/4" -11 1.1/4" 31 20
PN40AR 88.0 mm 55 125.0 bar G 1.1/2" -11 1.1/2" 38 24
DN = Nenndurchmesser, Nennweite

Disclaimer

Despite careful checking, we cannot guarantee the accuracy of all information included on this site, and we accept no liability.
All data and information in our online catalogue are based on currently valid standards and the regulations from the employer's liability insurance association. Product safety can only be guaranteed when our assembly instructions are carefully observed. Non-adherence to these regulations can affect product operation and functioning and result in a loss of warranty. Our warranty is only valid for HANSA-FLEX products. Our products are constantly subject to further development and technical changes are therefore possible.