PN ARI

Swage nipple, JIS



Properties

Connection 1 BSP nut thread
Sealing form 1 60° inner cone
Application Swage nipple for HD 100 to HD 400, KP and TE hoses
suitable for Toyota
Standard JIS 8363
Surface electro galvanised
Material Steel

Hints

Choose the appropriate ferrule based on the hose type.

Article Table

Product Name DN Size Inches G1 L1 mm S1
Product Name DN Size Inches G1 L1 mm S1
PN 06 ARI 02 6 4 1/4" G 1/8" -28 41,5 14
PN 06 ARI 6 4 1/4" G 1/4" -19 42,5 19
PN 08 ARI 06 8 5 5/16" G 1/4" -19 42,5 19
PN 08 ARI 10 8 5 5/16" G 3/8" -19 43,0 22
PN 10 ARI 10 6 3/8" G 3/8" -19 45,5 22
PN 13 ARI 12 8 1/2" G 1/2" -14 48,0 27
PN 20 ARI 19 12 3/4" G 3/4" -14 60,0 32
PN 25 ARI 25 16 1" G 1" -11 71,0 38
PN 32 ARI 31 20 1.1/4" G 1.1/4" -11 84,0 50
PN 40 ARI 38 24 1.1/2" G 1.1/2" -11 88,5 55

Disclaimer

Despite careful checking, we cannot guarantee the accuracy of all information included on this site, and we accept no liability.
All data and information in our online catalogue are based on currently valid standards and the regulations from the employer's liability insurance association. Product safety can only be guaranteed when our assembly instructions are carefully observed. Non-adherence to these regulations can affect product operation and functioning and result in a loss of warranty. Our warranty is only valid for HANSA-FLEX products. Our products are constantly subject to further development and technical changes are therefore possible.