PN FL

Swage nipple, BEL

  • Image_1 Image_1
  • Image_2 Image_2

Properties

Application area Swage nipple for HD 100 to HD 400, KP and TE hoses
Connection 1 Pipe sockets
Material Steel
Online-Shop https://shop.hansa-flex.com/de/PNFL
Sealing form 1 Cutting ring connection
Series light
Short code BEL
Standard ISO 8434-1
Surface electro galvanised

Hints

Die Schneidring-Endmontage muss im gehärteten Vormontagestutzen (VOM.
.
.
) erfolgen.
Nicht bei Neukonstruktionen einsetzen; wir empfehlen: PN.
.
.
AOL.
Die passende Fassung bitte nach dem Schlauchtyp auswählen.

Article Table

Product Name D2 mm L1 mm Betriebsdruck bar Zoll DN Size
Product Name D2 mm L1 mm Betriebsdruck bar Zoll DN Size
PN04FL 6.0 mm 50.5 mm 250.0 bar 3/16" 5 3
PN06FL04 6.0 mm 57.5 mm 250.0 bar 1/4" 6 4
PN06FL 8.0 mm 58.5 mm 250.0 bar 1/4" 6 4
PN08FL06 8.0 mm 58.0 mm 250.0 bar 5/16" 8 5
PN08FL 10.0 mm 59.5 mm 250.0 bar 5/16" 8 5
PN10FL08 10.0 mm 62.0 mm 250.0 bar 3/8" 10 6
PN10FL 12.0 mm 62.5 mm 250.0 bar 3/8" 10 6
PN10FL13 15.0 mm 61.0 mm 250.0 bar 3/8" 10 6
PN13FL10 12.0 mm 60.0 mm 250.0 bar 1/2" 12 8
PN13FL 15.0 mm 63.0 mm 250.0 bar 1/2" 12 8
PN13FL16 18.0 mm 65.0 mm 160.0 bar 1/2" 12 8
PN16FL 18.0 mm 69.5 mm 160.0 bar 5/8" 16 10
PN16FL20 22.0 mm 71.5 mm 160.0 bar 5/8" 16 10
PN20FL16 18.0 mm 74.5 mm 160.0 bar 3/4" 19 12
PN20FL 22.0 mm 79.0 mm 160.0 bar 3/4" 19 12
PN20FL25 28.0 mm 79.0 mm - 3/4" 19 12
PN25FL 28.0 mm 87.0 mm - 1" 25 16
PN32FL 35.0 mm 103.0 mm - 1.1/4" 31 20
PN40FL 42.0 mm 110.5 mm - 1.1/2" 38 24
DN = Nenndurchmesser, Nennweite

Disclaimer

Despite careful checking, we cannot guarantee the accuracy of all information included on this site, and we accept no liability.
All data and information in our online catalogue are based on currently valid standards and the regulations from the employer's liability insurance association. Product safety can only be guaranteed when our assembly instructions are carefully observed. Non-adherence to these regulations can affect product operation and functioning and result in a loss of warranty. Our warranty is only valid for HANSA-FLEX products. Our products are constantly subject to further development and technical changes are therefore possible.