PN FS

Swage nipple, BES

  • Image_1 Image_1
  • Image_2 Image_2

Properties

Application area Swage nipple for HD 100 to HD 400, KP and TE hoses
Connection 1 Pipe sockets
Material Steel
Sealing form 1 Cutting ring connection
Series heavy
Short code BES
Standard ISO 8434-1
Surface electro galvanised

Hints

Die Schneidring-Endmontage muss im gehärteten Vormontagestutzen (VOM.
.
.
) erfolgen.
Die passende Fassung bitte nach dem Schlauchtyp auswählen.
Nicht bei Neukonstruktionen einsetzen; wir empfehlen: PN.
.
.
AOS.

Article Table

Product Name D2 mm L1 mm Betriebsdruck bar Zoll DN Size
Product Name D2 mm L1 mm Betriebsdruck bar Zoll DN Size
PN04FS 8.0 mm 51.5 mm 630.0 bar 3/16" 5 3
PN06FS04 8.0 mm 58.5 mm 630.0 bar 1/4" 6 4
PN06FS 10.0 mm 60.5 mm 630.0 bar 1/4" 6 4
PN06FS08 12.0 mm 59.5 mm 630.0 bar 1/4" 6 4
PN08FS 12.0 mm 60.0 mm 630.0 bar 5/16" 8 5
PN10FS 14.0 mm 66.0 mm 630.0 bar 3/8" 10 6
PN10FS13 16.0 mm 70.0 mm 400.0 bar 3/8" 10 6
PN13FS08 12.0 mm 61.5 mm 400.0 bar 1/2" 12 8
PN13FS10 14.0 mm 67.0 mm 400.0 bar 1/2" 12 8
PN13FS 16.0 mm 70.0 mm 400.0 bar 1/2" 12 8
PN16FS13 16.0 mm 74.5 mm 400.0 bar 5/8" 16 10
PN16FS 20.0 mm 78.5 mm 400.0 bar 5/8" 16 10
PN16FS20 25.0 mm 85.0 mm 400.0 bar 5/8" 16 10
PN20FS13 16.0 mm 79.5 mm 400.0 bar 3/4" 19 12
PN20FS16 20.0 mm 86.0 mm 400.0 bar 3/4" 19 12
PN20FS 25.0 mm 90.0 mm 400.0 bar 3/4" 19 12
PN25FS20 25.0 mm 97.0 mm 250.0 bar 1" 25 16
PN25FS 30.0 mm 102.0 mm 250.0 bar 1" 25 16
PN25FS32 38.0 mm 109.5 mm 250.0 bar 1" 25 16
PN32FS25 30.0 mm 113.0 mm 250.0 bar 1.1/4" 31 20
PN32FS 38.0 mm 117.0 mm 250.0 bar 1.1/4" 31 20
PN40FS32 38.0 mm 120.5 mm 250.0 bar 1.1/2" 38 24
DN = Nenndurchmesser, Nennweite

Disclaimer

Despite careful checking, we cannot guarantee the accuracy of all information included on this site, and we accept no liability.
All data and information in our online catalogue are based on currently valid standards and the regulations from the employer's liability insurance association. Product safety can only be guaranteed when our assembly instructions are carefully observed. Non-adherence to these regulations can affect product operation and functioning and result in a loss of warranty. Our warranty is only valid for HANSA-FLEX products. Our products are constantly subject to further development and technical changes are therefore possible.