PN FS 45

Swage nipple, BES angle 45°



Properties

Connection 1 Pipe sockets
Series heavy
Sealing form 1 Cutting ring connection
Application Swage nipple for HD 100 to HD 400, KP and TE hoses
Standard ISO 8434-1
Short code BES
Surface electro galvanised
Material Steel

Hints

Final cutting ring assembly must be carried out in the hardened pre-assembly socket (VOM...).
Choose the appropriate ferrule based on the hose type.
Do not use for new designs; we recommend: PN...AOS...45.

Article Table

Product Name DN Size Inches Operating pressure bar D2 mm L1 mm L2 mm
Product Name DN Size Inches Operating pressure bar D2 mm L1 mm L2 mm
PN 04 FS 45 5 3 3/16" 630,0 8,0 59,0 20,0
PN 06 FS 45 6 4 1/4" 630,0 10,0 80,0 23,5
PN 06 FS 08 45 6 4 1/4" 630,0 12,0 82,5 22,0
PN 08 FS 45 8 5 5/16" 630,0 12,0 90,0 25,0
PN 10 FS 45 10 6 3/8" 630,0 14,0 82,5 27,0
PN 13 FS 10 45 12 8 1/2" 400,0 14,0 82,5 27,0
PN 13 FS 45 12 8 1/2" 400,0 16,0 97,0 30,0
PN 16 FS 13 45 16 10 5/8" 400,0 16,0 101,5 30,0
PN 16 FS 45 16 10 5/8" 400,0 20,0 106,0 34,0
PN 20 FS 16 45 19 12 3/4" 400,0 20,0 113,0 34,0
PN 20 FS 45 19 12 3/4" 400,0 25,0 126,0 39,0
PN 25 FS 20 45 25 16 3/4" 250,0 25,0 135,0 39,0
PN 25 FS 45 25 16 1" 250,0 30,0 146,0 44,0
PN 32 FS 25 45 31 20 1.1/4" 250,0 30,0 153,5 44,0
PN 32 FS 45 31 20 1.1/4" 250,0 38,0 172,5 51,0
PN 40 FS 32 45 38 24 1.1/2" 250,0 38,0 176,5 51,0

Disclaimer

Despite careful checking, we cannot guarantee the accuracy of all information included on this site, and we accept no liability.
All data and information in our online catalogue are based on currently valid standards and the regulations from the employer's liability insurance association. Product safety can only be guaranteed when our assembly instructions are carefully observed. Non-adherence to these regulations can affect product operation and functioning and result in a loss of warranty. Our warranty is only valid for HANSA-FLEX products. Our products are constantly subject to further development and technical changes are therefore possible.