PN FS 45 VA

Swage nipple, BES angle 45°

  • Image_1 Image_1
  • Image_2 Image_2

Properties

Application area Swage nipple for HD 100 to HD 400, KP and TE hoses
Connection 1 Pipe sockets
Material Stainless steel
Sealing form 1 Cutting ring connection
Series heavy
Short code BES
Standard ISO 8434-1

Hints

Die Schneidring-Endmontage muss im gehärteten Vormontagestutzen (VOM.
.
.
) erfolgen.
Die passende Fassung bitte nach dem Schlauchtyp auswählen.
Nicht bei Neukonstruktionen einsetzen; wir empfehlen: PN.
.
.
AOS.
.
.
45 VA.

Article Table

Product Name D2 mm L2 mm Zoll DN Size
Product Name D2 mm L2 mm Zoll DN Size
PN06FS0345VA 6.0 mm 22.0 mm 1/4" 6 4
PN06FS0445VA 8.0 mm 22.0 mm 1/4" 6 4
PN06FS45VA 10.0 mm 22.5 mm 1/4" 6 4
PN08FS0645VA 10.0 mm 25.0 mm 5/16" 8 5
PN08FS45VA 12.0 mm 24.0 mm 5/16" 8 5
PN10FS0645VA 10.0 mm 25.0 mm 3/8" 10 6
PN10FS0845VA 12.0 mm 45.0 mm 3/8" 10 6
PN10FS45VA 14.0 mm - 3/8" 10 6
PN13FS45VA 16.0 mm 32.0 mm 1/2" 12 8
PN16FS45VA 20.0 mm 31.0 mm 5/8" 16 10
PN20FS45VA 25.0 mm 42.0 mm 3/4" 19 12
PN25FS45VA 30.0 mm - 1" 25 16
PN32FS45VA 38.0 mm - 1.1/4" 31 20
DN = Nenndurchmesser, Nennweite

Disclaimer

Despite careful checking, we cannot guarantee the accuracy of all information included on this site, and we accept no liability.
All data and information in our online catalogue are based on currently valid standards and the regulations from the employer's liability insurance association. Product safety can only be guaranteed when our assembly instructions are carefully observed. Non-adherence to these regulations can affect product operation and functioning and result in a loss of warranty. Our warranty is only valid for HANSA-FLEX products. Our products are constantly subject to further development and technical changes are therefore possible.