PN HB

Swage nipple, AGR

  • Image_1 Image_1
  • Image_2 Image_2

Properties

Application area Swage nipple for HD 100 to HD 400, KP and TE hoses
Connection 1 BSP external thread, cylindrical
Material Steel
Online-Shop https://shop.hansa-flex.com/de/PNHB
Sealing form 1 60° inner cone
Short code AGR
Standard ISO 8434-6, BS 5200
Surface electro galvanised

Hints

Die passende Fassung bitte nach dem Schlauchtyp auswählen.

Article Table

Product Name L1 mm S1 Betriebsdruck bar G1 Zoll DN Size
Product Name L1 mm S1 Betriebsdruck bar G1 Zoll DN Size
PN04HB 42.5 mm 14 350.0 bar G 1/8" -28 3/16" 5 3
PN04HB06 46.0 mm 19 350.0 bar G 1/4" -19 3/16" 5 3
PN06HB02 48.5 mm 14 350.0 bar G 1/8" -28 1/4" 6 4
PN06HB 52.0 mm 19 400.0 bar G 1/4" -19 1/4" 6 4
PN06HB10 54.0 mm 22 400.0 bar G 3/8" -19 1/4" 6 4
PN06HB13 57.5 mm 27 350.0 bar G 1/2" -14 1/4" 6 4
PN08HB06 52.0 mm 19 400.0 bar G 1/4" -19 5/16" 8 5
PN08HB10 54.0 mm 22 400.0 bar G 3/8" -19 5/16" 8 5
PN08HB13 57.5 mm 27 350.0 bar G 1/2" -14 5/16" 8 5
PN10HB02 50.0 mm 17 350.0 bar G 1/8" -28 3/8" 10 6
PN10HB06 53.5 mm 19 400.0 bar G 1/4" -19 3/8" 10 6
PN10HB 55.5 mm 22 400.0 bar G 3/8" -19 3/8" 10 6
PN10HB13 59.5 mm 27 350.0 bar G 1/2" -14 3/8" 10 6
PN13HB10 56.5 mm 22 350.0 bar G 3/8" -19 1/2" 12 8
PN13HB 60.5 mm 27 350.0 bar G 1/2" -14 1/2" 12 8
PN13HB16 62.5 mm 30 350.0 bar G 5/8" -14 1/2" 12 8
PN13HB20 62.5 mm 32 250.0 bar G 3/4" -14 1/2" 12 8
PN16HB13 65.0 mm 27 350.0 bar G 1/2" -14 5/8" 16 10
PN16HB 67.0 mm 30 35.0 bar G 5/8" -14 5/8" 16 10
PN16HB20 67.0 mm 32 315.0 bar G 3/4" -14 5/8" 16 10
PN20HB 73.5 mm 32 315.0 bar G 3/4" -14 3/4" 19 12
PN20HB25 78.5 mm 41 250.0 bar G 1" -11 3/4" 19 12
PN25HB 86.5 mm 41 250.0 bar G 1" -11 1" 25 16
PN25HB32 87.5 mm 50 250.0 bar G 1.1/4" -11 1" 25 16
PN32HB 97.0 mm 50 250.0 bar G 1.1/4" -11 1.1/4" 31 20
PN32HB40 100.0 mm 55 210.0 bar G 1.1/2" -11 1.1/4" 31 20
PN40HB32 100.5 mm 50 210.0 bar G 1.1/4" -11 1.1/2" 38 24
PN40HB 103.5 mm 55 210.0 bar G 1.1/2" -11 1.1/2" 38 24
PN40HB50 109.0 mm 70 210.0 bar G 2" -11 1.1/2" 38 24
PN50HB 124.5 mm 70 210.0 bar G 2" -11 2" 51 32
DN = Nenndurchmesser, Nennweite

Disclaimer

Despite careful checking, we cannot guarantee the accuracy of all information included on this site, and we accept no liability.
All data and information in our online catalogue are based on currently valid standards and the regulations from the employer's liability insurance association. Product safety can only be guaranteed when our assembly instructions are carefully observed. Non-adherence to these regulations can affect product operation and functioning and result in a loss of warranty. Our warranty is only valid for HANSA-FLEX products. Our products are constantly subject to further development and technical changes are therefore possible.