PN HJOF

Swage nipple, ORFS

  • Image_1 Image_1
  • Image_2 Image_2

Properties

Application area Swage nipple for HD 100 to HD 400, KP and TE hoses
Connection 1 UN/UNF external threads
Material Steel
Sealing form 1 flat seal with O-ring
Short code ORFS
Standard ISO 8434-3
Surface electro galvanised

Hints

Choose the appropriate ferrule based on the hose type.

Article Table

Product Name L1 mm S1 Operating pressure bar G1 Inches DN OR Size
Product Name L1 mm S1 Operating pressure bar G1 Inches DN OR Size
PN 06 HJOF 52.5 17 413.0 9/16"-18 UNF 1/4" 6 7.65 x 1.78 4
PN 06 HJOF 10 54.0 19 413.0 11/16" -16 UN 1/4" 6 9.25 x 1.78 4
PN 08 HJOF 10 54.0 19 413.0 11/16" -16 UN 5/16" 8 9.25 x 1.78 5
PN 10 HJOF 56.0 19 413.0 11/16" -16 UN 3/8" 10 9.25 x 1.78 6
PN 10 HJOF 13 58.5 22 413.0 13/16" -16 UN 3/8" 10 12.42 x 1.78 6
PN 10 HJOF 16 62.0 27 413.0 1" -14 UNS 3/8" 10 15.60 x 1.78 6
PN 13 HJOF 60.0 22 413.0 13/16" -16 UN 1/2" 12 12.42 x 1.78 8
PN 13 HJOF 16 63.5 27 413.0 1" -14 UNS 1/2" 12 15.60 x 1.78 8
PN 13 HJOF 20 66.5 32 413.0 1.3/16" -12 UN 1/2" 12 18.77 x 1.78 8
PN 16 HJOF 68.0 27 413.0 1" -14 UNS 5/8" 16 15.60 x 1.78 10
PN 16 HJOF 20 71.0 32 413.0 1.3/16" -12 UN 5/8" 16 18.77 x 1.78 10
PN 20 HJOF 78.0 32 413.0 1.3/16" -12 UN 3/4" 19 18.77 x 1.78 12
PN 20 HJOF 25 82.5 41 413.0 1.7/16" -12 UN 3/4" 19 23.52 x 1.78 12
PN 25 HJOF 90.5 41 413.0 1.7/16" -12 UN 1" 25 23.52 x 1.78 16
PN 32 HJOF 101.5 46 275.0 1.11/16" -12 UN 1.1/4" 31 29.87 x 1.78 20
PN 40 HJOF 109.0 55 275.0 2" -12 UN 1.1/2" 38 37.82 x 1.78 24
DN = Nenndurchmesser, Nennweite

Disclaimer

Despite careful checking, we cannot guarantee the accuracy of all information included on this site, and we accept no liability.
All data and information in our online catalogue are based on currently valid standards and the regulations from the employer's liability insurance association. Product safety can only be guaranteed when our assembly instructions are carefully observed. Non-adherence to these regulations can affect product operation and functioning and result in a loss of warranty. Our warranty is only valid for HANSA-FLEX products. Our products are constantly subject to further development and technical changes are therefore possible.