PN HJR

Swage nipple, JIS

  • Image_1 Image_1
  • Image_2 Image_2

Properties

Application area Swage nipple for HD 100 to HD 400, KP and TE hoses
Connection 1 BSP external thread, cylindrical
Material Steel
Sealing form 1 60° outer cone
Standard JIS 8363
Surface electro galvanised
suitable for Toyota

Hints

Choose the appropriate ferrule based on the hose type.

Article Table

Product Name L1 mm S1 Operating pressure bar G1 Inches DN Size
Product Name L1 mm S1 Operating pressure bar G1 Inches DN Size
PN 06 HJR 56.0 17 345.0 G 1/4" -19 1/4" 6 4
PN 08 HJR 10 58.5 19 345.0 G 3/8" -19 5/16" 8 5
PN 10 HJR 60.0 19 345.0 G 3/8" -19 3/8" 10 6
PN 13 HJR 63.5 22 345.0 G 1/2" -14 1/2" 12 8
PN 20 HJR 78.0 30 275.0 G 3/4" -14 3/4" 19 12
DN = Nenndurchmesser, Nennweite

Disclaimer

Despite careful checking, we cannot guarantee the accuracy of all information included on this site, and we accept no liability.
All data and information in our online catalogue are based on currently valid standards and the regulations from the employer's liability insurance association. Product safety can only be guaranteed when our assembly instructions are carefully observed. Non-adherence to these regulations can affect product operation and functioning and result in a loss of warranty. Our warranty is only valid for HANSA-FLEX products. Our products are constantly subject to further development and technical changes are therefore possible.