PN HJR 90

Swage nipple, JIS angle 90°

  • Image_1 Image_1

Properties

Application area Swage nipple for HD 100 to HD 400, KP and TE hoses
Connection 1 BSP external thread, cylindrical
Material Steel
Sealing form 1 60° outer cone
Standard JIS 8363
Surface electro galvanised
suitable for Toyota

Hints

Choose the appropriate ferrule based on the hose type.

Article Table

Product Name Operating pressure bar G1 DN Inches Size L1 mm L2 mm
Product Name Operating pressure bar G1 DN Inches Size L1 mm L2 mm
PN 06 HJR 90 345.0 G 1/4" -19 6 1/4" 4 - -
PN 08 HJR 10 90 345.0 G 3/8" -19 8 5/16" 5 - -
PN 10 HJR 90 345.0 G 3/8" -19 10 3/8" 6 73.0 58.0
PN 13 HJR 90 345.0 G 1/2" -14 12 1/2" 8 - -
PN 20 HJR 90 275.0 G 3/4" -14 19 3/4" 12 - -
DN = Nominal diameter, nominal width

Disclaimer

Despite careful checking, we cannot guarantee the accuracy of all information included on this site, and we accept no liability.
All data and information in our online catalogue are based on currently valid standards and the regulations from the employer's liability insurance association. Product safety can only be guaranteed when our assembly instructions are carefully observed. Non-adherence to these regulations can affect product operation and functioning and result in a loss of warranty. Our warranty is only valid for HANSA-FLEX products. Our products are constantly subject to further development and technical changes are therefore possible.