PN HJ VA

Swage nipple, AGJ

  • Image_1 Image_1
  • Image_2 Image_2

Properties

Application area Swage nipple for HD 100 to HD 400, KP and TE hoses
Connection 1 UN/UNF external threads
Material Stainless steel
Sealing form 1 74° outer cone
Short code AGJ
Standard ISO 8434-2

Hints

Die passende Fassung bitte nach dem Schlauchtyp auswählen.

Article Table

Product Name S1 Betriebsdruck bar G1 Zoll DN Size
Product Name S1 Betriebsdruck bar G1 Zoll DN Size
PN06HJVA 14 350.0 bar 7/16"-20 UNF 1/4" 6 4
PN06HJ08VA 17 350.0 bar 1/2"-20 UNF 1/4" 6 4
PN06HJ10VA 17 350.0 bar 9/16"-18 UNF 1/4" 6 4
PN08HJVA 17 350.0 bar 1/2"-20 UNF 5/16" 8 5
PN08HJ10VA 17 350.0 bar 9/16"-18 UNF 5/16" 8 5
PN10HJVA 17 350.0 bar 9/16"-18 UNF 3/8" 10 6
PN10HJ13VA 22 350.0 bar 3/4" -16 UNF 3/8" 10 6
PN10HJ16VA 24 350.0 bar 7/8" -14 UNF 3/8" 10 6
PN13HJVA 22 350.0 bar 3/4" -16 UNF 1/2" 12 8
PN13HJ16VA 24 350.0 bar 7/8" -14 UNF 1/2" 12 8
PN13HJ20VA 27 350.0 bar 1.1/16" -12 UN 1/2" 12 8
PN16HJVA 24 350.0 bar 7/8" -14 UNF 5/8" 16 10
PN16HJ20VA 27 350.0 bar 1.1/16" -12 UN 5/8" 16 10
PN20HJVA 27 350.0 bar 1.1/16" -12 UN 3/4" 19 12
PN20HJ25VA 36 280.0 bar 1.5/16" -12 UN 3/4" 19 12
PN25HJVA 36 280.0 bar 1.5/16" -12 UN 1" 25 16
PN25HJ32VA 46 210.0 bar 1.5/8" -12 UN 1" 25 16
PN32HJVA 46 210.0 bar 1.5/8" -12 UN 1.1/4" 31 20
PN32HJ40VA 50 160.0 bar 1.7/8" -12 UN 1.1/4" 31 20
PN40HJVA 50 160.0 bar 1.7/8" -12 UN 1.1/2" 38 24
PN40HJ50VA 65 125.0 bar 2.1/2" -12 UN 1.1/2" 38 24
PN50HJVA 65 125.0 bar 2.1/2" -12 UN 2" 51 32
DN = Nenndurchmesser, Nennweite

Disclaimer

Despite careful checking, we cannot guarantee the accuracy of all information included on this site, and we accept no liability.
All data and information in our online catalogue are based on currently valid standards and the regulations from the employer's liability insurance association. Product safety can only be guaranteed when our assembly instructions are carefully observed. Non-adherence to these regulations can affect product operation and functioning and result in a loss of warranty. Our warranty is only valid for HANSA-FLEX products. Our products are constantly subject to further development and technical changes are therefore possible.