PN HL VA

Swage nipple, CEL

  • Image_1 Image_1
  • Image_2 Image_2

Properties

Application area Swage nipple for HD 100 to HD 400, KP and TE hoses
Connection 1 metric cylindrical outer thread
Material Stainless steel
Sealing form 1 24° inner cone
Series light
Short code CEL
Standard ISO 8434-1

Hints

Die passende Fassung bitte nach dem Schlauchtyp auswählen.

Article Table

Product Name L1 mm S1 G1 für Rohr-Außen-Ø mm Zoll DN Size
Product Name L1 mm S1 G1 für Rohr-Außen-Ø mm Zoll DN Size
PN06HL04VA 51.8 mm 14 M 12 x 1,5 6 mm 1/4" 6 4
PN06HLVA 51.8 mm 17 M 14 x 1.5 8 mm 1/4" 6 4
PN06HL08VA 52.8 mm 17 M 16 x 1.5 10 mm 1/4" 6 4
PN06HL10VA 53.8 mm 19 M 18 x 1.5 12 mm 1/4" 6 4
PN08HLVA 52.8 mm 17 M 16 x 1.5 10 mm 5/16" 8 5
PN10HL08VA 53.8 mm 17 M 16 x 1.5 10 mm 3/8" 10 6
PN10HLVA 53.8 mm 19 M 18 x 1.5 12 mm 3/8" 10 6
PN10HL13VA 54.8 mm 24 M 22 x 1.5 15 mm 3/8" 10 6
PN13HL10VA 55.8 mm 22 M 18 x 1.5 12 mm 1/2" 12 8
PN13HLVA 56.8 mm 24 M 22 x 1.5 15 mm 1/2" 12 8
PN13HL16VA 57.8 mm 27 M 26 x 1.5 18 mm 1/2" 12 8
PN16HLVA 61.0 mm 27 M 26 x 1.5 18 mm 5/8" 16 10
PN16HL20VA 63.0 mm 32 M 30 x 2 22 mm 5/8" 16 10
PN20HLVA 68.0 mm 32 M 30 x 2 22 mm 3/4" 19 12
PN25HLVA 74.5 mm 41 M 36 x 2 28 mm 1" 25 16
PN32HLVA 98.5 mm 46 M 45 x 2 35 mm 1.1/4" 31 20
PN40HLVA 99.5 mm 55 M 52 x 2 42 mm 1.1/2" 38 24
DN = Nenndurchmesser, Nennweite

Disclaimer

Despite careful checking, we cannot guarantee the accuracy of all information included on this site, and we accept no liability.
All data and information in our online catalogue are based on currently valid standards and the regulations from the employer's liability insurance association. Product safety can only be guaranteed when our assembly instructions are carefully observed. Non-adherence to these regulations can affect product operation and functioning and result in a loss of warranty. Our warranty is only valid for HANSA-FLEX products. Our products are constantly subject to further development and technical changes are therefore possible.