PN HN VA

Swage nipple, AGN



Properties

Connection 1 NPT external threads
Sealing form 1 thread seal, additional 60° inner cone.
Application Swage nipple for HD 100 to HD 400, KP and TE hoses
Short code AGN
Material Stainless steel

Hints

Choose the appropriate ferrule based on the hose type.

Article Table

Product Name DN Size Inches Operating pressure bar G1 S1
Product Name DN Size Inches Operating pressure bar G1 S1
PN 06 HN 02 VA 6 4 1/4" 345,0 1/8" -27 NPT 14
PN 06 HN VA 6 4 1/4" 345,0 1/4" -18 NPT 14
PN 06 HN 10 VA 6 4 1/4" 275,0 3/8" -18 NPT 19
PN 08 HN 06 VA 8 5 5/16" 345,0 1/4" -18 NPT -
PN 08 HN 10 VA 8 5 5/16" 275,0 3/8" -18 NPT 19
PN 10 HN 06 VA 10 6 3/8" 275,0 1/4" -18 NPT -
PN 10 HN VA 10 6 3/8" 275,0 3/8" -18 NPT 19
PN 10 HN 13 VA 10 6 3/8" 240,0 1/2" -14 NPT 22
PN 13 HN 10 VA 12 8 1/2" 240,0 3/8" -18 NPT 19
PN 13 HN VA 12 8 1/2" 240,0 1/2" -14 NPT 22
PN 13 HN 20 VA 12 8 1/2" 210,0 3/4" -14 NPT 27
PN 16 HN 13 VA 16 10 5/8" 210,0 1/2" -14 NPT -
PN 16 HN 20 VA 16 10 5/8" 210,0 3/4" -14 NPT 27
PN 20 HN 13 VA 19 12 3/4" 210,0 1/2" -14 NPT -
PN 20 HN VA 19 12 3/4" 210,0 3/4" -14 NPT 27
PN 20 HN 25 VA 19 12 3/4" 170,0 1" -11.5 NPT 36
PN 25 HN 20 VA 25 16 1" 170,0 3/4" -14 NPT -
PN 25 HN VA 25 16 1" 170,0 1" -11.5 NPT 36
PN 25 HN 32 VA 25 16 1" 150,0 1.1/4" -11.5 NPT -
PN 32 HN VA 31 20 1.1/4" 150,0 1.1/4" -11.5 NPT 46
PN 32 HN 40 VA 31 20 1.1/4" 140,0 1.1/2" -11.5 NPT -
PN 40 HN VA 38 24 1.1/2" 140,0 1.1/2" -11.5 NPT 50
PN 50 HN VA 51 32 2" 140,0 2" -11.5 NPT 65

Disclaimer

Despite careful checking, we cannot guarantee the accuracy of all information included on this site, and we accept no liability.
All data and information in our online catalogue are based on currently valid standards and the regulations from the employer's liability insurance association. Product safety can only be guaranteed when our assembly instructions are carefully observed. Non-adherence to these regulations can affect product operation and functioning and result in a loss of warranty. Our warranty is only valid for HANSA-FLEX products. Our products are constantly subject to further development and technical changes are therefore possible.