PN HS

Swage nipple, CES

  • Image_1 Image_1
  • Image_2 Image_2

Properties

Application area Swage nipple for HD 100 to HD 400, KP and TE hoses
Connection 1 metric cylindrical outer thread
Material Steel
Online-Shop https://shop.hansa-flex.com/de/PNHS
Sealing form 1 24° inner cone
Series heavy
Short code CES
Standard ISO 8434-1
Surface electro galvanised

Hints

Die passende Fassung bitte nach dem Schlauchtyp auswählen.

Article Table

Product Name L1 mm S1 Betriebsdruck bar G1 für Rohr-Außen-Ø mm Zoll DN Size
Product Name L1 mm S1 Betriebsdruck bar G1 für Rohr-Außen-Ø mm Zoll DN Size
PN04HS 48.0 mm 17 630.0 bar M 16 x 1.5 8 mm 3/16" 5 3
PN06HS03 52.0 mm 14 630.0 bar M 14 x 1.5 6 mm 1/4" 6 4
PN06HS04 54.0 mm 17 630.0 bar M 16 x 1.5 8 mm 1/4" 6 4
PN06HS 54.0 mm 19 630.0 bar M 18 x 1.5 10 mm 1/4" 6 4
PN08HS06 54.0 mm 19 630.0 bar M 18 x 1.5 10 mm 5/16" 8 5
PN08HS 56.0 mm 22 630.0 bar M 20 x 1.5 12 mm 5/16" 8 5
PN08HS13 58.0 mm 27 420.0 bar M 24 x 1.5 16 mm 5/16" 8 5
PN10HS06 55.5 mm 19 630.0 bar M 18 x 1.5 10 mm 3/8" 10 6
PN10HS08 57.5 mm 22 630.0 bar M 20 x 1.5 12 mm 3/8" 10 6
PN10HS 59.5 mm 24 630.0 bar M 22 x 1.5 14 mm 3/8" 10 6
PN10HS13 59.5 mm 27 420.0 bar M 24 x 1.5 16 mm 3/8" 10 6
PN13HS10 60.5 mm 24 420.0 bar M 22 x 1.5 14 mm 1/2" 12 8
PN13HS 60.5 mm 27 420.0 bar M 24 x 1.5 16 mm 1/2" 12 8
PN13HS16 64.5 mm 32 420.0 bar M 30 x 2 20 mm 1/2" 12 8
PN16HS 69.0 mm 32 420.0 bar M 30 x 2 20 mm 5/8" 16 10
PN20HS16 75.5 mm 32 420.0 bar M 30 x 2 20 mm 3/4" 19 12
PN20HS 79.5 mm 36 420.0 bar M 36 x 2 25 mm 3/4" 19 12
PN25HS20 87.5 mm 36 420.0 bar M 36 x 2 25 mm 1" 25 16
PN25HS 89.5 mm 46 420.0 bar M 42 x 2 30 mm 1" 25 16
PN32HS 104.0 mm 55 345.0 bar M 52 x 2 38 mm 1.1/4" 31 20
PN40HS32 107.5 mm 55 345.0 bar M 52 x 2 38 mm 1.1/2" 38 24
DN = Nenndurchmesser, Nennweite

Disclaimer

Despite careful checking, we cannot guarantee the accuracy of all information included on this site, and we accept no liability.
All data and information in our online catalogue are based on currently valid standards and the regulations from the employer's liability insurance association. Product safety can only be guaranteed when our assembly instructions are carefully observed. Non-adherence to these regulations can affect product operation and functioning and result in a loss of warranty. Our warranty is only valid for HANSA-FLEX products. Our products are constantly subject to further development and technical changes are therefore possible.