PN KAE STD

Swage nipple, KAE STD

  • Image_1 Image_1
  • Image_2 Image_2

Properties

Application area for HF/HW 100 and HF/HW 200 hoses
Connection 1 Rotating plug-in connection with ball bearing
Material Steel
Sealing form 1 O-ring sealed pin
Surface electro galvanised
suitable for Kärcher high pressure cleaners

Description

Self-aligning to prevent torsional stress.

Hints

Not suitable for use as rotary fitting.
Choose the appropriate ferrule based on the hose type.

Article Table

Product Name D1 mm OR DN Inches Size
Product Name D1 mm OR DN Inches Size
PN 08 KAE STD Swage nipple, KAE STD; Steel; electro galvanised 11.0 7.65 x 1.78 8 5/16" 5
DN = Nominal diameter, nominal width

Disclaimer

Despite careful checking, we cannot guarantee the accuracy of all information included on this site, and we accept no liability.
All data and information in our online catalogue are based on currently valid standards and the regulations from the employer's liability insurance association. Product safety can only be guaranteed when our assembly instructions are carefully observed. Non-adherence to these regulations can affect product operation and functioning and result in a loss of warranty. Our warranty is only valid for HANSA-FLEX products. Our products are constantly subject to further development and technical changes are therefore possible.