PN SF 45

Swage nipple, SFL angle 45°

  • Image_1 Image_1
  • Image_2 Image_2

Properties

Application area Swage nipple for HD 100 to HD 400, KP and TE hoses
Connection 1 SAE flange connection 3000 PSI
Material Steel
Sealing form 1 flat seal with SF O-ring
Short code SFL
Standard SAE J 518
ISO 6162-1
Surface electro galvanised

Hints

Choose the appropriate ferrule based on the hose type.

Article Table

Product Name L1 mm L2 mm D mm Operating pressure bar H mm DN Flange size Inches Size
Product Name L1 mm L2 mm D mm Operating pressure bar H mm DN Flange size Inches Size
PN 13 SF 45 81.0 21.0 Swage nipple, SFL angle 45°; Steel; electro galvanised 30.2 350.0 6.80 12 1/2" 1/2" 8
PN 13 SF 20 45 84.5 24.5 Swage nipple, SFL angle 45°; Steel; electro galvanised 38.1 350.0 6.80 12 3/4" 1/2" 8
PN 16 SF 13 45 100.0 26.5 Swage nipple, SFL angle 45°; Steel; electro galvanised 30.2 350.0 6.80 16 1/2" 5/8" 10
PN 16 SF 20 45 96.5 27.5 Swage nipple, SFL angle 45°; Steel; electro galvanised 38.1 350.0 6.80 16 3/4" 5/8" 10
PN 20 SF 45 107.5 28.0 Swage nipple, SFL angle 45°; Steel; electro galvanised 38.1 350.0 6.80 19 3/4" 3/4" 12
PN 20 SF 25 45 109.5 30.0 Swage nipple, SFL angle 45°; Steel; electro galvanised 44.4 320.0 8.10 19 1" 3/4" 12
PN 25 SF 20 45 128.0 30.0 Swage nipple, SFL angle 45°; Steel; electro galvanised 38.1 320.0 6.70 25 3/4" 1" 16
PN 25 SF 45 132.0 30.5 Swage nipple, SFL angle 45°; Steel; electro galvanised 44.4 320.0 8.00 25 1" 1" 16
PN 25 SF 32 45 134.0 32.0 Swage nipple, SFL angle 45°; Steel; electro galvanised 50.8 280.0 8.10 25 1.1/4" 1" 16
PN 32 SF 25 45 156.0 41.0 Swage nipple, SFL angle 45°; Steel; electro galvanised 44.4 280.0 8.10 31 1" 1.1/4" 20
PN 32 SF 45 156.0 36.0 Swage nipple, SFL angle 45°; Steel; electro galvanised 50.8 280.0 8.10 31 1.1/4" 1.1/4" 20
PN 32 SF 40 45 160.0 40.0 Swage nipple, SFL angle 45°; Steel; electro galvanised 60.3 210.0 8.10 31 1.1/2" 1.1/4" 20
PN 40 SF 45 184.0 46.0 Swage nipple, SFL angle 45°; Steel; electro galvanised 60.3 210.0 8.10 38 1.1/2" 1.1/2" 24
PN 40 SF 50 45 184.0 46.0 Swage nipple, SFL angle 45°; Steel; electro galvanised 71.4 210.0 9.60 38 2" 1.1/2" 24
PN 50 SF 40 45 182.0 42.0 Swage nipple, SFL angle 45°; Steel; electro galvanised 60.3 210.0 8.10 51 1.1/2" 2" 32
PN 50 SF 45 219.0 50.0 Swage nipple, SFL angle 45°; Steel; electro galvanised 71.4 210.0 9.60 51 2" 2" 32
PN 50 SF 60 45 212.0 57.0 Swage nipple, SFL angle 45°; Steel; electro galvanised 84.0 175.0 9.60 51 2.1/2" 2" 32
PN 60 SF 45 237.0 50.0 Swage nipple, SFL angle 45°; Steel; electro galvanised 84.0 175.0 9.60 60 2.1/2" 2.3/8" 40
PN 76 SF 60 45 230.0 56.3 Swage nipple, SFL angle 45°; Steel; electro galvanised 84.0 160.0 9.53 76 2.1/2" 3" 48
PN 76 SF 45 228.0 55.0 Swage nipple, SFL angle 45°; Steel; electro galvanised 101.6 160.0 9.53 76 3" 3" 48
DN = Nominal diameter, nominal width

Disclaimer

Despite careful checking, we cannot guarantee the accuracy of all information included on this site, and we accept no liability.
All data and information in our online catalogue are based on currently valid standards and the regulations from the employer's liability insurance association. Product safety can only be guaranteed when our assembly instructions are carefully observed. Non-adherence to these regulations can affect product operation and functioning and result in a loss of warranty. Our warranty is only valid for HANSA-FLEX products. Our products are constantly subject to further development and technical changes are therefore possible.