PN SF6

Swage nipple, SFS

  • Image_1 Image_1
  • Image_2 Image_2

Properties

Application area Swage nipple for HD 100 to HD 400, KP and TE hoses
Connection 1 SAE flange connection 6000 PSI
Material Steel
Sealing form 1 flat seal with SF O-ring
Short code SFS
Standard SAE J518
ISO 6162-2
Surface electro galvanised

Hints

Choose the appropriate ferrule based on the hose type.

Article Table

Product Name H mm L1 mm D mm Flange size Operating pressure bar Inches DN Size
Product Name H mm L1 mm D mm Flange size Operating pressure bar Inches DN Size
PN 13 SF6 7.8 81.5 31.8 1/2" 420.0 1/2" 12 8
PN 13 SF6 20 8.8 89.5 41.3 3/4" 420.0 1/2" 12 8
PN 16 SF6 13 7.8 86.0 31.8 1/2" 420.0 5/8" 16 10
PN 16 SF6 20 8.8 97.0 41.3 3/4" 420.0 5/8" 16 10
PN 16 SF6 25 9.6 104.0 47.6 1" 420.0 5/8" 16 10
PN 20 SF6 13 7.8 93.5 31.8 1/2" 420.0 3/4" 19 12
PN 20 SF6 8.8 104.5 41.3 3/4" 420.0 3/4" 19 12
PN 20 SF6 25 9.6 109.0 47.6 1" 420.0 3/4" 19 12
PN 25 SF6 20 8.8 112.5 41.3 3/4" 420.0 1" 25 16
PN 25 SF6 9.6 121.5 47.6 1" 420.0 1" 25 16
PN 25 SF6 32 10.4 126.0 54.0 1.1/4" 420.0 1" 25 16
PN 32 SF6 25 9.6 131.5 47.6 1" 420.0 1.1/4" 31 20
PN 32 SF6 10.4 138.0 54.0 1.1/4" 420.0 1.1/4" 31 20
PN 32 SF6 40 12.7 142.5 63.5 1.1/2" 420.0 1.1/4" 31 20
PN 40 SF6 12.7 150.5 63.5 1.1/2" 420.0 1.1/2" 38 24
PN 40 SF6 32 10.4 141.5 54.0 1.1/4" 420.0 1.1/2" 38 24
PN 40 SF6 50 12.7 155.0 79.4 2" 420.0 1.1/2" 38 24
PN 50 SF6 12.7 174.0 79.4 2" 420.0 2" 51 32
DN = Nenndurchmesser, Nennweite

Disclaimer

Despite careful checking, we cannot guarantee the accuracy of all information included on this site, and we accept no liability.
All data and information in our online catalogue are based on currently valid standards and the regulations from the employer's liability insurance association. Product safety can only be guaranteed when our assembly instructions are carefully observed. Non-adherence to these regulations can affect product operation and functioning and result in a loss of warranty. Our warranty is only valid for HANSA-FLEX products. Our products are constantly subject to further development and technical changes are therefore possible.