PN SF6 90

Swage nipple, SFS angle 90°



Properties

Connection 1 SAE flange connection 6000 PSI
Sealing form 1 flat seal with SF O-ring
Application Swage nipple for HD 100 to HD 400, KP and TE hoses
Standard ISO 6162-2, SAE J518
Short code SFS
Surface electro galvanised
Material Steel

Hints

Choose the appropriate ferrule based on the hose type.

Article Table

Product Name DN Size Inches Flange size Operating pressure bar D mm H mm L1 mm L2 mm
Product Name DN Size Inches Flange size Operating pressure bar D mm H mm L1 mm L2 mm
PN 13 SF6 90 12 8 1/2" 1/2" 420,0 31,8 7,8 71,5 44,5
PN 13 SF6 20 90 12 8 1/2" 3/4" 420,0 41,3 8,8 71,5 52,5
PN 16 SF6 13 90 16 10 5/8" 1/2" 420,0 31,8 7,8 91,0 60,0
PN 16 SF6 20 90 16 10 5/8" 3/4" 420,0 41,3 8,8 87,0 59,0
PN 16 SF6 25 90 16 10 5/8" 1" 420,0 47,6 9,6 106,0 72,0
PN 20 SF6 13 90 19 12 3/4" 1/2" 420,0 31,8 7,8 97,0 61,0
PN 20 SF6 90 19 12 3/4" 3/4" 420,0 41,3 8,8 99,0 61,0
PN 20 SF6 25 90 19 12 3/4" 1" 420,0 47,6 9,6 99,0 67,0
PN 25 SF6 20 90 25 16 1" 3/4" 420,0 41,3 8,8 115,0 67,0
PN 25 SF6 90 25 16 1" 1" 420,0 47,6 9,6 126,0 74,5
PN 25 SF6 32 90 25 16 1" 1.1/4" 420,0 54,0 10,4 126,0 81,5
PN 32 SF6 90 L 80 31 20 1.1/4" 1.1/4" 420,0 54,0 10,4 150,5 80,0
PN 32 SF6 25 90 31 20 1.1/4" 1" 420,0 47,6 9,6 134,0 79,0
PN 32 SF6 90 31 20 1.1/4" 1.1/4" 420,0 54,0 10,4 150,5 90,5
PN 32 SF6 40 90 31 20 1.1/4" 1.1/2" 420,0 63,5 12,7 150,5 99,0
PN 40 SF6 32 90 L 120 38 24 1.1/2" 1.1/4" 420,0 54,0 10,4 155,0 120,0
PN 40 SF6 90 38 24 1.1/2" 1.1/2" 420,0 63,5 12,7 175,5 108,5
PN 40 SF6 50 90 38 24 1.1/2" 2" 420,0 79,4 12,7 175,5 124,5
PN 50 SF6 90 51 32 2" 2" 420,0 79,4 12,7 219,5 140,0

Disclaimer

Despite careful checking, we cannot guarantee the accuracy of all information included on this site, and we accept no liability.
All data and information in our online catalogue are based on currently valid standards and the regulations from the employer's liability insurance association. Product safety can only be guaranteed when our assembly instructions are carefully observed. Non-adherence to these regulations can affect product operation and functioning and result in a loss of warranty. Our warranty is only valid for HANSA-FLEX products. Our products are constantly subject to further development and technical changes are therefore possible.