PN SF 90

Swage nipple, SFL angle 90°



Properties

Connection 1 SAE flange connection 3000 PSI
Sealing form 1 flat seal with SF O-ring
Application Swage nipple for HD 100 to HD 400, KP and TE hoses
Standard ISO 6162-1, SAE J518
Short code SFL
Surface electro galvanised
Material Steel

Hints

Choose the appropriate ferrule based on the hose type.

Article Table

Product Name DN Size Inches Flange size Operating pressure bar D mm H mm L1 mm L2 mm
Product Name DN Size Inches Flange size Operating pressure bar D mm H mm L1 mm L2 mm
PN 13 SF 90 12 8 1/2" 1/2" 350,0 30,2 6,80 71,5 43,5
PN 13 SF 20 90 12 8 1/2" 3/4" 350,0 38,1 6,80 71,5 48,5
PN 13 SF 25 90 12 8 1/2" 1" 320,0 44,5 8,10 94,0 65,0
PN 16 SF 13 90 16 10 5/8" 1/2" 350,0 30,2 6,80 91,0 56,0
PN 16 SF 20 90 16 10 5/8" 3/4" 350,0 38,1 6,80 87,0 55,0
PN 16 SF 25 90 16 10 5/8" 1" 320,0 44,5 8,10 106,0 66,0
PN 20 SF 90 19 12 3/4" 3/4" 350,0 38,1 6,80 99,0 57,0
PN 20 SF 25 90 19 12 3/4" 1" 320,0 44,5 8,10 99,0 60,0
PN 20 SF 32 90 19 12 3/4" 1.1/4" 280,0 50,8 8,10 121,0 74,0
PN 25 SF 20 90 25 16 1" 3/4" 320,0 38,1 6,80 115,0 66,0
PN 25 SF 90 25 16 1" 1" 320,0 44,5 8,10 126,0 67,5
PN 25 SF 90 L 142 25 16 1" 1" 320,0 44,5 8,10 126,0 142,0
PN 25 SF 32 90 25 16 1" 1.1/4" 280,0 50,8 8,10 126,0 70,0
PN 25 SF 40 90 25 16 1" 1.1/2" 210,0 60,3 8,10 148,0 95,0
PN 32 SF 25 90 31 20 1.1/4" 1" 280,0 44,5 8,10 134,0 74,0
PN 32 SF 90 31 20 1.1/4" 1.1/4" 280,0 50,8 8,10 150,5 79,0
PN 32 SF 90 L 88 31 20 1.1/4" 1.1/4" 280,0 50,8 8,10 150,5 88,0
PN 32 SF 90 L 120 31 20 1.1/4" 1.1/4" 280,0 50,8 8,10 150,5 120,0
PN 32 SF 90 L 155 31 20 1.1/4" 1.1/4" 280,0 50,8 8,10 150,5 155,0
PN 32 SF 40 90 31 20 1.1/4" 1.1/2" 210,0 60,3 8,10 150,5 84,5
PN 40 SF 90 38 24 1.1/2" 1.1/2" 210,0 60,3 8,10 169,0 99,0
PN 40 SF 90 L 80 38 24 1.1/2" 1.1/2" 210,0 60,3 8,10 169,0 80,0
PN 40 SF 90 L 124 38 24 1.1/2" 1.1/2" 210,0 60,3 8,10 169,0 124,0
PN 40 SF 90 L 144 38 24 1.1/2" 1.1/2" 210,0 60,3 8,10 169,0 144,0
PN 40 SF 90 L 150 38 24 1.1/2" 1.1/2" 210,0 60,3 8,10 169,0 150,0
PN 40 SF 50 90 38 24 1.1/2" 2" 210,0 71,4 9,60 175,5 100,0
PN 40 SF 50 90 L 150 38 24 1.1/2" 2" 210,0 71,4 9,60 175,5 150,0
PN 50 SF 40 90 51 32 2" 1.1/2" 210,0 60,3 8,10 197,0 116,0
PN 50 SF 90 51 32 2" 2" 210,0 71,4 9,60 219,5 115,5
PN 50 SF 90 L 120 51 32 2" 2" 210,0 71,4 9,60 219,5 120,0
PN 50 SF 90 L 140 51 32 2" 2" 210,0 71,4 9,60 219,5 140,0
PN 50 SF 90 L 160 51 32 2" 2" 210,0 71,4 9,60 216,5 160,0
PN 50 SF 90 L 170 51 32 2" 2" 210,0 71,4 9,60 219,5 170,0
PN 50 SF 90 L 220 51 32 2" 2" 210,0 71,4 9,60 219,5 220,0
PN 50 SF 60 90 51 32 2" 2.1/2" 175,0 84,1 9,60 198,0 122,0
PN 50 SF 60 90 L 200 51 32 2" 2.1/2" 175,0 84,1 9,60 168,0 200,0
PN 60 SF 50 90 60 40 2.3/8" 2" 175,0 71,4 9,60 223,0 115,5
PN 60 SF 90 60 40 2.3/8" 2.1/2" 175,0 84,1 9,60 237,0 128,0
PN 60 SF 90 L 118 60 40 2.3/8" 2.1/2" 175,0 84,1 9,60 237,0 118,0
PN 76 SF 90 76 48 3" 3" 160,0 101,6 9,53 230,0 135,0
PN 76 SF 90 L 120 76 48 3" 3" 160,0 101,6 9,53 240,0 120,0

Disclaimer

Despite careful checking, we cannot guarantee the accuracy of all information included on this site, and we accept no liability.
All data and information in our online catalogue are based on currently valid standards and the regulations from the employer's liability insurance association. Product safety can only be guaranteed when our assembly instructions are carefully observed. Non-adherence to these regulations can affect product operation and functioning and result in a loss of warranty. Our warranty is only valid for HANSA-FLEX products. Our products are constantly subject to further development and technical changes are therefore possible.