PN SF9 90

Swage nipple, SFS-CAT angle 90°

  • Image_1 Image_1
  • Image_2 Image_2

Properties

Application area Swage nipple for HD 100 to HD 400, KP and TE hoses
Connection 1 SAE flange connection 6000 PSI
Material Steel
Sealing form 1 flat seal with SF O-ring
Short code SFS-CAT
Surface electro galvanised
suitable for Caterpillar

Hints

Choose the appropriate ferrule based on the hose type.

Article Table

Product Name H mm L1 mm L2 mm D mm Flange size Operating pressure bar Inches DN Size
Product Name H mm L1 mm L2 mm D mm Flange size Operating pressure bar Inches DN Size
PN 20 SF9 90 14.6 99.0 66.5 41.3 3/4" 420.0 3/4" 19 12
PN 20 SF9 25 90 14.6 99.0 71.5 47.6 1" 420.0 3/4" 19 12
PN 25 SF9 90 14.6 126.0 79.0 47.6 1" 420.0 1" 25 16
PN 25 SF9 32 90 14.6 126.0 85.5 54.0 1.1/4" 420.0 1" 25 16
PN 32 SF9 90 14.6 150.5 94.5 54.0 1.1/4" 420.0 1.1/4" 31 20
PN 32 SF9 40 90 14.6 150.5 100.5 63.5 1.1/2" 420.0 1.1/4" 31 20
PN 40 SF9 90 14.6 175.5 110.0 63.5 1.1/2" 420.0 1.1/2" 38 24
DN = Nenndurchmesser, Nennweite

Disclaimer

Despite careful checking, we cannot guarantee the accuracy of all information included on this site, and we accept no liability.
All data and information in our online catalogue are based on currently valid standards and the regulations from the employer's liability insurance association. Product safety can only be guaranteed when our assembly instructions are carefully observed. Non-adherence to these regulations can affect product operation and functioning and result in a loss of warranty. Our warranty is only valid for HANSA-FLEX products. Our products are constantly subject to further development and technical changes are therefore possible.