PN SO

Swage nipple, SO

  • Image_1 Image_1
  • Image_2 Image_2

Properties

Application area Swage nipple for HD 100 to HD 400, KP and TE hoses
Connection 1 Plug-in O port
Material Steel
Standard DIN 20043
Surface electro galvanised

Description

Self-aligning to prevent torsional stress.

Hints

Choose the appropriate ferrule based on the hose type.

Article Table

Product Name L1 mm OR DN Inches Size
Product Name L1 mm OR DN Inches Size
PN 06 SO 63.5 Swage nipple, SO; Steel; electro galvanised 6.0 x 2.0 6 1/4" 4
PN 10 SO 65.5 Swage nipple, SO; Steel; electro galvanised 10.0 x 2.0 10 3/8" 6
PN 13 SO 67.0 Swage nipple, SO; Steel; electro galvanised 13.2 x 2.5 12 1/2" 8
PN 16 SO 71.5 Swage nipple, SO; Steel; electro galvanised 16.0 x 2.5 16 5/8" 10
PN 20 SO 78.5 Swage nipple, SO; Steel; electro galvanised 19.0 x 2.5 19 3/4" 12
PN 25 SO 92.5 Swage nipple, SO; Steel; electro galvanised 25.0 x 2.5 25 1" 16
PN 32 SO 102.0 Swage nipple, SO; Steel; electro galvanised 33.0 x 2.5 31 1.1/4" 20
PN 40 SO 110.5 Swage nipple, SO; Steel; electro galvanised 40.0 x 3.0 38 1.1/2" 24
PN 50 SO 126.0 Swage nipple, SO; Steel; electro galvanised 49.0 x 3.0 51 2" 32
DN = Nominal diameter, nominal width

Disclaimer

Despite careful checking, we cannot guarantee the accuracy of all information included on this site, and we accept no liability.
All data and information in our online catalogue are based on currently valid standards and the regulations from the employer's liability insurance association. Product safety can only be guaranteed when our assembly instructions are carefully observed. Non-adherence to these regulations can affect product operation and functioning and result in a loss of warranty. Our warranty is only valid for HANSA-FLEX products. Our products are constantly subject to further development and technical changes are therefore possible.