PN WEO S

Swage nipple, WEO S

  • Image_1 Image_1
  • Image_2 Image_2

Properties

Application area Swage nipple for HD 100 to HD 400, KP and TE hoses
Connection 1 WEO plug
Material Steel
Sealing form 1 O-ring sealed pin
Surface electro galvanised

Description

Self-aligning to prevent torsional stress.

Hints

Choose the appropriate ferrule based on the hose type.

Article Table

Product Name L1 mm Operating pressure Size DN Inches Ø D1 mm Size
Product Name L1 mm Operating pressure Size DN Inches Ø D1 mm Size
PN 04 WEO 10 S 54.5 Swage nipple, WEO S; Steel; electro galvanised PN 100 3/16" 5 3/16" 10.0 3
PN 06 WEO 10 S 58.0 Swage nipple, WEO S; Steel; electro galvanised PN 350 1/4" 6 1/4" 10.0 4
PN 06 WEO 13 S 61.0 Swage nipple, WEO S; Steel; electro galvanised PN 350 3/8" 6 1/4" 13.0 4
PN 08 WEO 13 S 61.9 Swage nipple, WEO S; Steel; electro galvanised PN 350 3/8" 8 5/16" 13.0 5
PN 10 WEO 13 S 63.0 Swage nipple, WEO S; Steel; electro galvanised PN 350 3/8" 10 3/8" 13.0 6
PN 10 WEO 16 S 63.0 Swage nipple, WEO S; Steel; electro galvanised PN 350 1/2" 10 3/8" 16.0 6
PN 13 WEO 16 S 64.0 Swage nipple, WEO S; Steel; electro galvanised PN 350 1/2" 12 1/2" 16.0 8
PN 13 WEO 23 S 73.5 Swage nipple, WEO S; Steel; electro galvanised PN 350 3/4" 12 1/2" 23.0 8
PN 16 WEO 23 S 77.5 Swage nipple, WEO S; Steel; electro galvanised PN 350 3/4" 16 5/8" 23.0 10
PN 20 WEO 23 S 82.0 Swage nipple, WEO S; Steel; electro galvanised PN 350 3/4" 19 3/4" 23.0 12
PN 25 WEO 30 S 100.5 Swage nipple, WEO S; Steel; electro galvanised PN 250 1" 25 1" 30.0 16
DN = Nominal diameter, nominal width

Disclaimer

Despite careful checking, we cannot guarantee the accuracy of all information included on this site, and we accept no liability.
All data and information in our online catalogue are based on currently valid standards and the regulations from the employer's liability insurance association. Product safety can only be guaranteed when our assembly instructions are carefully observed. Non-adherence to these regulations can affect product operation and functioning and result in a loss of warranty. Our warranty is only valid for HANSA-FLEX products. Our products are constantly subject to further development and technical changes are therefore possible.