PN WEO S 45

Swage nipple, WEO S angle 45°

  • Image_1 Image_1
  • Image_2 Image_2

Properties

Application area Swage nipple for HD 100 to HD 400, KP and TE hoses
Connection 1 WEO plug
Material Steel
Sealing form 1 O-ring sealed pin
Surface electro galvanised

Description

Self-aligning to prevent torsional stress.

Hints

Choose the appropriate ferrule based on the hose type.

Article Table

Product Name L2 mm Operating pressure Size Ø D1 mm Inches DN Size
Product Name L2 mm Operating pressure Size Ø D1 mm Inches DN Size
PN 06 WEO 10 S 45 27.0 PN 350 1/4" 10.0 1/4" 6 4
PN 06 WEO 13 S 45 30.5 PN 350 3/8" 13.0 1/4" 6 4
PN 08 WEO 13 S 45 31.5 PN 350 3/8" 13.0 5/16" 8 5
PN 10 WEO 13 S 45 31.5 PN 350 3/8" 13.0 3/8" 10 6
PN 10 WEO 16 S 45 33.5 PN 350 1/2" 16.0 3/8" 10 6
PN 13 WEO 16 S 45 36.5 PN 350 1/2" 16.0 1/2" 12 8
PN 13 WEO 23 S 45 45.0 PN 350 3/4" 23.0 1/2" 12 8
PN 16 WEO 23 S 45 49.5 PN 350 3/4" 23.0 5/8" 16 10
PN 20 WEO 23 S 45 49.5 PN 350 3/4" 23.0 3/4" 19 12
DN = Nenndurchmesser, Nennweite

Disclaimer

Despite careful checking, we cannot guarantee the accuracy of all information included on this site, and we accept no liability.
All data and information in our online catalogue are based on currently valid standards and the regulations from the employer's liability insurance association. Product safety can only be guaranteed when our assembly instructions are carefully observed. Non-adherence to these regulations can affect product operation and functioning and result in a loss of warranty. Our warranty is only valid for HANSA-FLEX products. Our products are constantly subject to further development and technical changes are therefore possible.