POLY H

Polyurethane suction / delivery hose


Properties

Outer layer Polyurethane
Special features flexible ., high abrasion resistance, oil and petrol resistant, smooth flow channel, vacuum resistant
Insert embedded steel wire helix
Application Granulate supply equipment, Industrial vacuum cleaners
Colour Transparent
Inner layer Polyurethane
Media Air, Granulates, Water

Hints

Wall thickness between the coils 1.45 mm

Article Table

Product Name Inches Internal Ø mm External Ø mm BD* at 20°C bar Vacuum bar Min. bending radius mm Weight per m kg Roll length m
Product Name Inches Internal Ø mm External Ø mm BD* at 20°C bar Vacuum bar Min. bending radius mm Weight per m kg Roll length m
POLY 25 H 1" 25 33 4,1 0,94 37 0,290 15
POLY 40 H 1.1/2" 40 49 3,0 0,84 60 0,490 15
POLY 45 H 1.3/4" 45 55 3,0 0,83 80 0,550 15
POLY 50 H 2" 50 61 2,9 0,80 75 0,710 15
POLY 60 H 2.1/2" 60 70 2,5 0,75 90 0,840 15
POLY 100 H 4" 100 112 1,5 0,45 150 1,480 15
POLY 110 H 4.3/8" 110 121 1,3 0,45 165 1,610 15
POLY 120 H 5" 120 131 1,3 0,31 180 1,750 15
POLY 125 H 5" 125 138 1,3 0,31 187 1,910 15
POLY 150 H 6" 150 163 1,0 0,25 225 2,290 15
POLY 200 H 8" 200 215 0,7 0,19 300 3,300 15
BD = Working pressure

Order hints

Also available in the version microbe-resistant, suitable for use with foodstuffs, flame-resistant or electrically conductive.

Disclaimer

Despite careful checking, we cannot guarantee the accuracy of all information included on this site, and we accept no liability.
All data and information in our online catalogue are based on currently valid standards and the regulations from the employer's liability insurance association. Product safety can only be guaranteed when our assembly instructions are carefully observed. Non-adherence to these regulations can affect product operation and functioning and result in a loss of warranty. Our warranty is only valid for HANSA-FLEX products. Our products are constantly subject to further development and technical changes are therefore possible.