PSG

PVC hose with braided insert


Properties

Outer layer Soft PVC
Special features abrasion and aging resistant, environmentally and free of heavy metals, Hardness: approx. 77° Shore A, permanently transparent, sterilisable, very flexible
Insert one braided textile insert
Application general application for air, water etc.
Colour clear
Inner layer Soft PVC
Media Air, Water

Article Table

Product Name Internal Ø mm External Ø mm Wall thickness mm BD* at 20 °C bar Min. bending radius mm Roll length m
Product Name Internal Ø mm External Ø mm Wall thickness mm BD* at 20 °C bar Min. bending radius mm Roll length m
PSG 04-3 4,0 10,0 3,0 20 15 50
PSG 05-3 5,0 11,0 3,0 20 20 50
PSG 06-3 6,0 12,0 3,0 20 25 50
PSG 08-3 8,0 14,0 3,0 20 30 50
PSG 09-3 9,0 15,0 3,0 15 35 50
PSG 10-3 10,0 16,0 3,0 15 40 50
PSG 12-3 12,0 18,0 3,0 15 50 50
PSG 12-4.5 12,0 21,0 4,5 15 50 50
PSG 12.5-3 12,5 18,5 3,0 15 50 50
PSG 13-3 13,0 19,0 3,0 15 60 50
PSG 13-3.5 13,0 20,0 3,5 15 60 50
PSG 15-3 15,0 21,0 3,0 10 75 50
PSG 16-3.5 16,0 23,0 3,5 10 80 50
PSG 16-4 16,0 24,0 4,0 10 80 50
PSG 19-3.5 19,0 26,0 3,5 10 80 50
PSG 19-4 19,0 27,0 4,0 10 100 50
PSG 19-5 19,0 29,0 5,0 10 100 50
PSG 22-4 22,0 30,0 4,0 8 180 50
PSG 25-4 25,0 33,0 4,0 8 200 50
PSG 25-4.5 25,0 34,0 4,5 8 120 50
PSG 30-4 30,0 38,0 4,0 7 170 50
PSG 32-5 32,0 42,0 5,0 7 180 50
PSG 38-5 38,0 48,0 5,0 6 200 50
PSG 45-5 45,0 55,0 5,0 4 300 25
PSG 50-5 50,0 60,0 5,0 4 350 25
BD = Working pressure

Disclaimer

Despite careful checking, we cannot guarantee the accuracy of all information included on this site, and we accept no liability.
All data and information in our online catalogue are based on currently valid standards and the regulations from the employer's liability insurance association. Product safety can only be guaranteed when our assembly instructions are carefully observed. Non-adherence to these regulations can affect product operation and functioning and result in a loss of warranty. Our warranty is only valid for HANSA-FLEX products. Our products are constantly subject to further development and technical changes are therefore possible.