PVC WAS

PVC water hose

  • Image_1 Image_1

Properties

Application area Construction industry
Agricultural technology
Inner layer stable, high flexibility, smooth plasticised PVC
Insert impact and pressure resistant PVC reinforcing spiral
Media Water
Outer layer stable, high flexibility, smooth plasticised PVC
Special features extremely durable, flexible, resistant to pressure and abrasion, UV and weatherproof
slightly ribbed outer cover
Temp. max. 60 °C
Temp. min. -5 °C

Hints

All "-6" designations for example do not refer to the wall thickness

Article Table

Product Name Unit Vacuum bar Roll length m BD* at 20°C bar Inches Internal Ø mm Burst pressure bar Wall thickness mm Min. bending radius mm
Product Name Unit Vacuum bar Roll length m BD* at 20°C bar Inches Internal Ø mm Burst pressure bar Wall thickness mm Min. bending radius mm
PVC WAS 19-6 Reel 0.7 50 8.0 Yes 3/4" 19 25 3.0 85
PVC WAS 25-7 Reel 0.6 50 7.0 Yes 1" 25 21 3.0 105
PVC WAS 32-6 Reel 0.6 50 6.0 Yes 1.1/4" 32 21 3.0 125
PVC WAS 38-6 Reel 0.6 50 6.0 Yes 1.1/2" 38 18 3.5 150
PVC WAS 50-5 Reel 0.6 50 5.0 Yes 2" 51 15 4.5 205
PVC WAS 60-4.5 Meter 0.6 50 4.5 No 2.1/2" 60 13 4.5 248
PVC WAS 76-3.5 Meter 0.6 50 3.5 No 3" 76 12 4.5 320
PVC WAS 90-3.5 Meter 0.6 30 3.0 No 3.1/2" 90 11 5.0 395
BD = Working pressure

Disclaimer

Despite careful checking, we cannot guarantee the accuracy of all information included on this site, and we accept no liability.
All data and information in our online catalogue are based on currently valid standards and the regulations from the employer's liability insurance association. Product safety can only be guaranteed when our assembly instructions are carefully observed. Non-adherence to these regulations can affect product operation and functioning and result in a loss of warranty. Our warranty is only valid for HANSA-FLEX products. Our products are constantly subject to further development and technical changes are therefore possible.