PW G

Wiper PW-G

  • Image_1 Image_1
  • Image_2 Image_2

Properties

Application Hydraulics
Installation is pressed into an open groove
Material (1) Sleeve: Steel
(2) Wiper: PUR
Media Mineral oil
Sliding speed max. 0.8 m/s
Temp. max. 80 °C
Temp. min. -30 °C

Description

Low spatial requirement.
High abrasion resistance.
Simple solution.

Article Table

Product Name D mm d mm L mm
Product Name D mm d mm L mm
PW 8-1G 14 8 3.5
PW 10-2G 16 10 3.5
PW 10-1G 20 10 5.0
PW 12-3G 18 12 3.5
PW 12-2G 20 12 4.0
PW 12-1G 22 12 5.0
PW 14-2G 20 14 3.5
PW 14-G 22 14 4.5
PW 15-2G 21 15 3.5
PW 16-2G 22 16 3.0
PW 16-1G 26 16 5.0
PW 18-G 26 18 4.5
PW 18-2G 28 18 5.0
PW 20-2G 30 20 4.0
PW 20-3G 30 20 5.0
PW 20-1G 30 20 7.0
PW 22-2G 28 22 5.0
PW 22-3G 32 22 5.0
PW 22-1G 32 22 7.0
PW 25-2G 32 25 5.0
PW 25-3G 35 25 5.0
PW 28-3G 38 28 5.0
PW 28-2G 38 28 7.0
PW 28-1G 40 28 7.0
PW 30-3G 40 30 5.0
PW 30-1G 40 30 7.0
PW 30-2G 45 30 5.0
PW 32-4G 42 32 5.0
PW 32-3G 42 32 7.0
PW 32-2G 45 32 4.0
PW 33-1G 43 33 7.0
PW 35-1G 45 35 7.0
PW 36-1G 45 36 7.0
PW 38-1G 48 38 7.0
PW 40-2G 50 40 5.0
PW 42-2G 52 42 5.0
PW 42-1G 52 42 7.0
PW 45-3G 55 45 5.0
PW 45-2G 55 45 7.0
PW 45-G 57 45 7.0
PW 45-1G 60 45 7.0
PW 50-2G 60 50 5.0
PW 50-1G 60 50 7.0
PW 55-2G 65 55 5.0
PW 55-1G 65 55 7.0
PW 56-2G 66 56 5.0
PW 56-1G 66 56 7.0
PW 60-4G 70 60 5.0
PW 60-1G 70 60 7.0
PW 60-3G 74 60 5.0
PW 63-2G 73 63 5.0
PW 63-1G 75 63 7.0
PW 65-2G 75 65 5.0
PW 65-1G 75 65 7.0
PW 70-2G 80 70 5.0
PW 70-1G 80 70 7.0
PW 75-2G 83 75 7.0
PW 75-1G 85 75 7.0
PW 80-2G 88 80 7.0
PW 80-1G 90 80 7.0
PW 90-1G 100 90 7.0
PW 95-1G 105 95 7.0
PW 100-1G 110 100 7.0
PW 100-G 114 100 8.0
PW 105-1G 115 105 7.0
PW 110-1G 120 110 7.0
PW 120-1G 130 120 7.0

Disclaimer

Despite careful checking, we cannot guarantee the accuracy of all information included on this site, and we accept no liability.
All data and information in our online catalogue are based on currently valid standards and the regulations from the employer's liability insurance association. Product safety can only be guaranteed when our assembly instructions are carefully observed. Non-adherence to these regulations can affect product operation and functioning and result in a loss of warranty. Our warranty is only valid for HANSA-FLEX products. Our products are constantly subject to further development and technical changes are therefore possible.