RED GD

SAE block flange reduction, angle 90°

  • Image_1 Image_1
  • Image_2 Image_2

Properties

Construction Angle 90°
Design SAE block flange reduction
Material S355J2G3 (ST52.3)
Mounting Inner thread for metric screws
Pressure series 6000 psi
Standard SAE J 518 C
ISO 6162
Surface electro galvanised

Hints

The stated maximum working pressure relates to the flange. The actual working pressure is determined by the pipe (wall thickness) and the quality of the pipe.

Article Table

Product Name C1 mm E1 mm Size PB 10.9 bar M metr. D mm L mm S2 mm G mm E2 mm S1 mm B2 mm F mm B1 mm C2 mm
Product Name C1 mm E1 mm Size PB 10.9 bar M metr. D mm L mm S2 mm G mm E2 mm S1 mm B2 mm F mm B1 mm C2 mm
RED GD 603-602 57.2 27.8 1" 420 M 10 82 14 40 64 23.8 37 19 68 23 50.8
RED GD 604-602 66.7 31.8 1.1/4" 420 M 10 96 16 46 72 23.8 41 19 76 30 50.8
RED GD 604-603 66.7 31.8 1.1/4" 420 M 12 96 16 46 72 27.8 41 23 76 30 57.2
RED GD 605-604 79.4 36.5 1.1/2" 420 M 14 114 19 52 89 31.8 50 30 86 38 66.7
RED GD 606-605 96.8 44.5 2" 420 M 16 133 22 70 110 36.5 59 38 110 50 79.4
PN = Nominal pressure PB = Max. operating pressure

Disclaimer

Despite careful checking, we cannot guarantee the accuracy of all information included on this site, and we accept no liability.
All data and information in our online catalogue are based on currently valid standards and the regulations from the employer's liability insurance association. Product safety can only be guaranteed when our assembly instructions are carefully observed. Non-adherence to these regulations can affect product operation and functioning and result in a loss of warranty. Our warranty is only valid for HANSA-FLEX products. Our products are constantly subject to further development and technical changes are therefore possible.