RIK

Reducing adapter, short



Properties

Connection 1 BSP external thread, cylindrical
Connection 2 BSP cylindrical internal threads
Design Reducing adapters
Construction short
Sealing form 1 Shape B
Surface electro galvanised
Material Steel

Hints

Information about fitting, installation, pressure loads and permissible operating temperatures can be found in the technical information for pipe fittings.

Article Table

Product Name Operating pressure G1 G2 Ø d3 mm i1 mm i2 mm L mm AF mm
Product Name Operating pressure G1 G2 Ø d3 mm i1 mm i2 mm L mm AF mm
RIK NW 10 03 PN 400 G 3/8" -19 G 1/8" -28 22 12 9 22,5 22
RIK NW 13 03 PN 400 G 1/2" -14 G 1/8" -28 26 14 9 24,0 27
RIK NW 13 06 PN 315 G 1/2" -14 G 1/4" -19 26 14 13 24,0 27
RIK NW 20 06 PN 315 G 3/4" -14 G 1/4" -19 32 16 13 26,0 32
RIK NW 20 10 PN 315 G 3/4" -14 G 3/8" -19 32 16 14 26,0 32
RIK NW 25 06 PN 315 G 1" -11 G 1/4" -19 39 18 14 29,0 41
RIK NW 25 10 PN 315 G 1" -11 G 3/8" -19 39 18 14 29,0 41
RIK NW 25 13 PN 315 G 1" -11 G 1/2" -14 39 18 16 29,0 41
RIK NW 32 13 PN 160 G 1.1/4" -11 G 1/2" -14 49 20 16 32,0 50
RIK NW 32 20 PN 160 G 1.1/4" -11 G 3/4" -14 49 20 18 32,0 50
RIK NW 40 13 PN 160 G 1.1/2" -11 G 1/2" -14 55 22 16 36,0 55
RIK NW 40 20 PN 160 G 1.1/2" -11 G 3/4" -14 55 22 18 36,0 55
RIK NW 40 25 PN 160 G 1.1/2" -11 G 1" -11 55 22 20 36,0 55
PN = Nominal pressure PB = Max. operating pressure

Disclaimer

Despite careful checking, we cannot guarantee the accuracy of all information included on this site, and we accept no liability.
All data and information in our online catalogue are based on currently valid standards and the regulations from the employer's liability insurance association. Product safety can only be guaranteed when our assembly instructions are carefully observed. Non-adherence to these regulations can affect product operation and functioning and result in a loss of warranty. Our warranty is only valid for HANSA-FLEX products. Our products are constantly subject to further development and technical changes are therefore possible.