RIK ED VA

Reducing adapter, short

  • Image_1 Image_1
  • Image_2 Image_2

Properties

Connection 1 BSP external thread, cylindrical
Connection 2 BSP cylindrical internal threads
Construction short
Design Reducing adapters
Material Stainless steel
Sealing form 1 Shape E

Hints

Information about fitting, installation, pressure loads and permissible operating temperatures can be found in the technical information for pipe fittings.

Article Table

Product Name G2 L mm Ø d3 mm Operating pressure AF mm G1 i2 mm i1 mm
Product Name G2 L mm Ø d3 mm Operating pressure AF mm G1 i2 mm i1 mm
RIK NW 10 03 ED VA Reducing adapter, short; Stainless steel G 1/8" -28 22.5 21.9 PN 400 22 G 3/8" -19 9 12
RIK NW 13 03 ED VA Reducing adapter, short; Stainless steel G 1/8" -28 24.0 26.9 PN 400 27 G 1/2" -14 9 14
RIK NW 13 06 ED VA Reducing adapter, short; Stainless steel G 1/4" -19 24.0 26.9 PN 400 27 G 1/2" -14 14 14
RIK NW 20 03 ED VA Reducing adapter, short; Stainless steel G 1/8" -28 26.0 31.9 PN 315 32 G 3/4" -14 9 16
RIK NW 20 06 ED VA Reducing adapter, short; Stainless steel G 1/4" -19 26.0 31.9 PN 315 32 G 3/4" -14 14 16
RIK NW 20 10 ED VA Reducing adapter, short; Stainless steel G 3/8" -19 26.0 31.9 PN 315 32 G 3/4" -14 14 16
RIK NW 25 06 ED VA Reducing adapter, short; Stainless steel G 1/4" -19 29.0 39.9 PN 315 41 G 1" -11 14 18
RIK NW 25 10 ED VA Reducing adapter, short; Stainless steel G 3/8" -19 29.0 39.9 PN 315 41 G 1" -11 14 18
RIK NW 25 13 ED VA Reducing adapter, short; Stainless steel G 1/2" -14 29.0 39.9 PN 315 41 G 1" -11 16 18
RIK NW 32 13 ED VA Reducing adapter, short; Stainless steel G 1/2" -14 32.0 49.9 PN 315 50 G 1.1/4" -11 16 20
RIK NW 32 20 ED VA Reducing adapter, short; Stainless steel G 3/4" -14 32.0 49.9 PN 315 50 G 1.1/4" -11 18 20
RIK NW 40 13 ED VA Reducing adapter, short; Stainless steel G 1/2" -14 36.0 54.9 PN 250 55 G 1.1/2" -11 16 22
RIK NW 40 20 ED VA Reducing adapter, short; Stainless steel G 3/4" -14 36.0 54.9 PN 250 55 G 1.1/2" -11 18 22
RIK NW 40 25 ED VA Reducing adapter, short; Stainless steel G 1" -11 36.0 54.9 PN 250 55 G 1.1/2" -11 20 22
RIK NW 50 40 ED VA Reducing adapter, short; Stainless steel G 1.1/2" -11 40.0 69.9 PN 160 70 G 2" -11 24 24
PN = Nominal pressure
AF = Width across flats

Order hints

Seals of NBR
FPM (Viton) on request

Disclaimer

Despite careful checking, we cannot guarantee the accuracy of all information included on this site, and we accept no liability.
All data and information in our online catalogue are based on currently valid standards and the regulations from the employer's liability insurance association. Product safety can only be guaranteed when our assembly instructions are carefully observed. Non-adherence to these regulations can affect product operation and functioning and result in a loss of warranty. Our warranty is only valid for HANSA-FLEX products. Our products are constantly subject to further development and technical changes are therefore possible.