RIK MG

Reducing adapter, short

  • Image_1 Image_1
  • Image_2 Image_2

Properties

Connection 1 BSP external thread, cylindrical
Connection 2 BSP cylindrical internal threads
Construction short
Design Reducing adapters
Material Brass
Sealing form 1 Shape B

Hints

Information about fitting, installation, pressure loads and permissible operating temperatures can be found in the technical information for pipe fittings.

Article Table

Product Name G2 Operating pressure Ø d3 mm AF mm G1 i2 mm i1 mm L mm
Product Name G2 Operating pressure Ø d3 mm AF mm G1 i2 mm i1 mm L mm
RIK NW 10 03 MG G 1/8" -28 PN 250 22 22 G 3/8" -19 8 12 22.5
RIK NW 13 03 MG G 1/8" -28 PN 250 26 27 G 1/2" -14 8 14 24.0
RIK NW 13 06 MG G 1/4" -19 PN 200 26 27 G 1/2" -14 12 14 24.0
RIK NW 20 06 MG G 1/4" -19 PN 200 32 32 G 3/4" -14 12 16 26.0
RIK NW 20 10 MG G 3/8" -19 PN 200 32 32 G 3/4" -14 12 16 26.0
RIK NW 25 10 MG G 3/8" -19 PN 200 39 41 G 1" -11 12 18 29.0
RIK NW 25 13 MG G 1/2" -14 PN 200 39 41 G 1" -11 14 18 29.0
RIK NW 32 13 MG G 1/2" -14 PN 100 49 50 G 1.1/4" -11 14 20 32.0
RIK NW 32 20 MG G 3/4" -14 PN 100 49 60 G 1.1/4" -11 16 20 32.0
RIK NW 40 13 MG G 1/2" -14 PN 100 55 55 G 1.1/2" -11 14 22 36.0
RIK NW 40 20 MG G 3/4" -14 PN 100 55 55 G 1.1/2" -11 16 22 36.0
RIK NW 40 25 MG G 1" -11 PN 100 55 55 G 1.1/2" -11 18 22 36.0
PN = Nominal pressure PB = Max. operating pressure

Disclaimer

Despite careful checking, we cannot guarantee the accuracy of all information included on this site, and we accept no liability.
All data and information in our online catalogue are based on currently valid standards and the regulations from the employer's liability insurance association. Product safety can only be guaranteed when our assembly instructions are carefully observed. Non-adherence to these regulations can affect product operation and functioning and result in a loss of warranty. Our warranty is only valid for HANSA-FLEX products. Our products are constantly subject to further development and technical changes are therefore possible.