RKL HL / RKL HS

Pipe coupling (loose)


Properties

Connection 1 metric cylindrical outer thread
Sealing form 1 24° inner cone
Application Automotive engineering
Surface electro galvanised
Material Steel
Residual pressure: Coupling under residual pressure is possible

Description

Pipe couplings are designed for high pressures and pressure pulses.

Hints

Size 5 with hand wheel

Article Table

Product Name DN* Series for external pipe Ø mm Connecting thread Size Coupling thread Operating pressure bar SF coup.* Mineral oil temp. min. °C Mineral oil temp. max. °C
Product Name DN* Series for external pipe Ø mm Connecting thread Size Coupling thread Operating pressure bar SF coup.* Mineral oil temp. min. °C Mineral oil temp. max. °C
RKL 06 HL 1 6 L 8 M 14x1,5 1 Rd. 32 x 3 315,0 4,0 -25 85
RKL 08 HL 1 8 L 10 M 16x1,5 1 Rd. 32 x 3 315,0 4,0 -25 85
RKL 10 HL 1 10 L 12 M 18x1,5 1 Rd. 32 x 3 315,0 4,0 -25 85
RKL 13 HL 1 12 L 15 M 22x1,5 1 Rd. 32 x 3 315,0 4,0 -25 85
RKL 13 HL 2 12 L 15 M 22x1,5 2 Rd. 36x3 300,0 4,0 -25 85
RKL 13 HL 3 12 L 15 M 22x1,5 3 Rd. 48 x 3 300,0 3,5 -25 100
RKL 16 HL 3 16 L 18 M 26x1,5 3 Rd. 48 x 3 300,0 3,5 -25 100
RKL 16 HL 4 16 L 18 M 26x1,5 4 Rd. 54 x 4 300,0 3,5 -25 85
RKL 20 HL 4 19 L 22 M 30x2 4 Rd. 54 x 4 160,0 4,0 -25 85
RKL 20 HL 5 19 L 22 M 30x2 5 Rd. 60 x 3 160,0 4,0 -40 100
RKL 25 HL 4 25 L 28 M 36x2 4 Rd. 54 x 4 160,0 4,0 -25 85
RKL 25 HL 5 25 L 28 M 36x2 5 Rd. 60 x 3 160,0 4,0 -40 100
RKL 32 HL 6 31 L 35 M 45x2 6 Rd. 79 x 4 160,0 4,0 -25 85
RKL 06 HS 1 6 S 10 M 18x1,5 1 Rd. 32 x 3 400,0 4,0 -25 85
RKL 08 HS 1 8 S 12 M 20x1,5 1 Rd. 32 x 3 400,0 4,0 -25 85
RKL 10 HS 1 10 S 14 M 22x1,5 1 Rd. 32 x 3 400,0 4,0 -25 85
RKL 13 HS 2 12 S 16 M 24x1,5 2 Rd. 36x3 300,0 4,0 -25 85
RKL 13 HS 3 12 S 16 M 24x1,5 3 Rd. 48 x 3 300,0 3,5 -25 100
RKL 16 HS 3 16 S 20 M 30x2 3 Rd. 48 x 3 300,0 3,5 -25 100
RKL 16 HS 4 16 S 20 M 30x2 4 Rd. 54 x 4 300,0 3,5 -25 85
RKL 20 HS 4 19 S 25 M 36x2 4 Rd. 54 x 4 300,0 3,5 -25 85
RKL 20 HS 5 19 S 25 M 36x2 5 Rd. 60 x 3 160,0 4,0 -40 100
RKL 25 HS 4 25 S 30 M 42x2 4 Rd. 54 x 4 300,0 3,5 -25 85
RKL 25 HS 5 25 S 30 M 42x2 5 Rd. 60 x 3 160,0 4,0 -40 100
RKL 32 HS 6 31 S 38 M 52x2 6 Rd. 79 x 4 420,0 2,5 -25 85
DN = Nominal diameter, nominal width - SF gek. = Safety factor coupled

Order hints

Other pressure and temperature figures available on request.

Disclaimer

Despite careful checking, we cannot guarantee the accuracy of all information included on this site, and we accept no liability.
All data and information in our online catalogue are based on currently valid standards and the regulations from the employer's liability insurance association. Product safety can only be guaranteed when our assembly instructions are carefully observed. Non-adherence to these regulations can affect product operation and functioning and result in a loss of warranty. Our warranty is only valid for HANSA-FLEX products. Our products are constantly subject to further development and technical changes are therefore possible.