RSE AE

Piston seal RSE-AE

  • Image_1 Image_1
  • Image_2 Image_2

Properties

Application Hydraulics
Design Piston U-ring
Installation on one-piece pistons A
on multi-part pistons B
Material (2) Seal: PUR
(2) Support ring: acetal resin / PTBR
Max. operating pressure up to 500 bar
Media Mineral oil
Sliding speed max. 0.5 m/s
Temp. max. 80 °C
Temp. min. -30 °C

Description

High abrasion resistance.
Good tightness.
Simple solution.

Hints

The piston seals are not suitable for double-acting pistons. Please contact us.

Article Table

Product Name D mm Standard grooves Profile d mm L mm
Product Name D mm Standard grooves Profile d mm L mm
RSE 40 25-AE 40 ISO 5597 B 25 9.5
RSE 50 35-AE 50 ISO 5597 B 35 9.5
RSE 60 45-AE 60 ISO 5597 A 45 9.5
RSE 63 48-AE 63 ISO 5597 B 48 9.5
RSE 70 50-AE 70 - A 50 12.5
RSE 80 60-AE 80 ISO 5597 B 60 12.5
RSE 90 70-AE 90 ISO 5597 B 70 12.5
RSE 100 80-AE 100 ISO 5597 B 80 12.5
RSE 110 90-AE 110 ISO 5597 B 90 12.5
RSE 125 100-AE 125 ISO 5597 B 100 15.5
RSE 140 115-AE 140 ISO 5597 A 115 15.5
RSE 140 120-AE 140 - B 120 12.5
RSE 160 140-AE 160 - B 140 12.5
RSE 200 170-AE 200 ISO 5597 A 170 19.0
RSE 200 175-AE 200 - A 175 16.0

Disclaimer

Despite careful checking, we cannot guarantee the accuracy of all information included on this site, and we accept no liability.
All data and information in our online catalogue are based on currently valid standards and the regulations from the employer's liability insurance association. Product safety can only be guaranteed when our assembly instructions are carefully observed. Non-adherence to these regulations can affect product operation and functioning and result in a loss of warranty. Our warranty is only valid for HANSA-FLEX products. Our products are constantly subject to further development and technical changes are therefore possible.