SA DKO

Welded on sealing cone

  • Image_1 Image_1
  • Image_2 Image_2

Properties

Connection 1 Welded on socket for metric pipe
Construction straight
Design Welded on sealing cone
Material Steel
Sealing form 2 24° outer cone with O-ring
Standard ISO 8434-1
DIN 3865
Surface phosphate treated and oiled (Znphr5f)

Hints

Information about fitting, installation, pressure loads and permissible operating temperatures can be found in the technical information for pipe fittings.

Article Table

Product Name L1 mm L2 mm Operating pressure External pipe Ø mm Series Ø d1 mm Ø d2 mm OR
Product Name L1 mm L2 mm Operating pressure External pipe Ø mm Series Ø d1 mm Ø d2 mm OR
SA NW 03 DKO 1.5 32.5 31.0 PN 528 6 S 3 6 4.0 x 1.5
SA NW 04 DKO 1.5 32.0 30.0 PN 414 8 S 5 8 6.0 x 1.5
SA NW 04 DKO 2 31.5 31.0 PN 528 8 S 4 8 6.0 x 1.5
SA NW 06 DKO 1 33.5 32.5 PN 249 10 S 8 10 7.5 x 1.5
SA NW 06 DKO 1.5 33.5 31.5 PN 358 10 S 7 10 7.5 x 1.5
SA NW 06 DKO 2 33.5 31.5 PN 460 10 S 6 10 7.5 x 1.5
SA NW 08 DKO 1.5 33.5 31.5 PN 305 12 S 9 12 9.0 x 1.5
SA NW 08 DKO 2 33.5 31.5 PN 393 12 S 8 12 9.0 x 1.5
SA NW 08 DKO 2.5 33.5 31.5 PN 476 12 S 7 12 9.0 x 1.5
SA NW 08 DKO 3 33.5 32.5 PN 551 12 S 6 12 9.0 x 1.5
SA NW 10 DKO 2 40.0 37.5 PN 343 14 S 10 14 10.0 x 2.0
SA NW 10 DKO 3 39.5 38.5 PN 487 14 S 8 14 10.0 x 2.0
SA NW 13 DKO 1.5 40.5 37.5 PN 234 16 S 13 16 12.0 x 2.0
SA NW 13 DKO 2 40.5 37.5 PN 305 16 S 12 16 12.0 x 2.0
SA NW 13 DKO 2.5 40.5 37.5 PN 372 16 S 11 16 12.0 x 2.0
SA NW 13 DKO 3 40.5 37.5 PN 400 16 S 10 16 12.0 x 2.0
SA NW 16 DKO 2 47.0 43.5 PN 249 20 S 16 20 16.3 x 2.4
SA NW 16 DKO 2.5 46.5 43.0 PN 305 20 S 15 20 16.3 x 2.4
SA NW 16 DKO 3 46.5 43.0 PN 358 20 S 14 20 16.3 x 2.4
SA NW 16 DKO 3.5 47.5 43.5 PN 400 20 S 13 20 16.3 x 2.4
SA NW 16 DKO 4 46.5 43.0 PN 400 20 S 12 20 16.3 x 2.4
SA NW 20 DKO 2 53.0 48.0 PN 201 25 S 21 25 20.3 x 2.4
SA NW 20 DKO 3 53.0 48.0 PN 294 25 S 19 25 20.3 x 2.4
SA NW 20 DKO 4 53.0 48.0 PN 379 25 S 17 25 20.3 x 2.4
SA NW 20 DKO 5 53.0 48.0 PN 400 25 S 15 25 20.3 x 2.4
SA NW 25 DKO 3 57.5 51.5 PN 249 30 S 24 30 25.3 x 2.4
SA NW 25 DKO 4 57.5 51.5 PN 323 30 S 22 30 25.3 x 2.4
SA NW 25 DKO 5 57.5 51.5 PN 393 30 S 20 30 25.3 x 2.4
SA NW 25 DKO 6 57.0 52.0 PN 400 30 S 18 30 25.3 x 2.4
SA NW 32 DKO 4 64.0 55.0 PN 261 38 S 30 38 33.3 x 2.4
SA NW 32 DKO 5 64.0 55.0 PN 315 38 S 28 38 33.3 x 2.4
SA NW 32 DKO 6 64.0 55.0 PN 315 38 S 26 38 33.3 x 2.4
SA NW 32 DKO 7 64.0 56.5 PN 315 38 S 24 38 33.3 x 2.4
Series: LL = Very light L = Light S = Heavy
PN = Nominal pressure PB = Max. operating pressure
Ø d2 = External pipe diameter

Disclaimer

Despite careful checking, we cannot guarantee the accuracy of all information included on this site, and we accept no liability.
All data and information in our online catalogue are based on currently valid standards and the regulations from the employer's liability insurance association. Product safety can only be guaranteed when our assembly instructions are carefully observed. Non-adherence to these regulations can affect product operation and functioning and result in a loss of warranty. Our warranty is only valid for HANSA-FLEX products. Our products are constantly subject to further development and technical changes are therefore possible.