SA DKOL VA

Welded on sealing cone

  • Image_1 Image_1
  • Image_2 Image_2

Properties

Connection 1 Welded on socket for metric pipe
Construction straight
Design Welded on sealing cone
Material Stainless steel
Online-Shop https://shop.hansa-flex.com/de/SADKOLVA
Sealing form 2 24° outer cone with O-ring
Standard DIN 3865

Hints

Hinweise zur Montage, Einbau, Druckbelastung und zulässige Betriebstemperaturen entnehmen Sie bitte den technischen Informationen für Rohrverschraubungen.

Article Table

Product Name L1 mm L2 mm Betriebsdruck Baureihe Ø d1 mm Ø d2 mm OR
Product Name L1 mm L2 mm Betriebsdruck Baureihe Ø d1 mm Ø d2 mm OR
SANW13DKOL1.5VA 38.0 mm 36.0 mm PN 270 L 12 mm 15 mm 12.0 x 2.0
SANW13DKOL2VA 38.0 mm 36.0 mm PN 315 L 11 mm 15 mm 12.0 x 2.0
SANW13DKOL2.5VA 35.0 mm 34.5 mm PN 315 L 10 mm 15 mm 12.0 x 2.0
SANW16DKOL1.5VA 39.0 mm 37.0 mm PN 225 L 15 mm 18 mm 15.0 x 2.0
SANW16DKOL2.0VA 39.0 mm 37.0 mm PN 300 L 14 mm 18 mm 15.0 x 2.0
SANW16DKOL2.5VA 37.0 mm 36.0 mm PN 315 L 13 mm 18 mm 15.0 x 2.0
SANW20DKOL2.0VA 40.5 mm 38.5 mm PN 160 L 18 mm 22 mm 20.0 x 2.0
SANW20DKOL2.5VA 39.5 mm 37.5 mm PN 160 L 17 mm 22 mm 20.0 x 2.0
SANW20DKOL3.0VA 40.5 mm 38.5 mm PN 160 L 16 mm 22 mm 20.0 x 2.0
SANW25DKOL2.0VA 43.5 mm 41.5 mm PN 160 L 24 mm 28 mm 26.0 x 2.0
SANW25DKOL2.5VA 53.0 mm 48.0 mm PN 160 L 23 mm 28 mm 26.0 x 2.0
SANW25DKOL3VA 42.5 mm 47.0 mm PN 160 L 22 mm 28 mm 26.0 x 2.0
SANW32DKOL2.0VA 49.0 mm 47.0 mm PN 154 L 31 mm 35 mm 32.0 x 2.5
SANW32DKOL2.5VA 49.0 mm 47.0 mm PN 160 L 30 mm 35 mm 32.0 x 2.5
SANW32DKOL3.0VA 49.0 mm 47.0 mm PN 160 L 29 mm 35 mm 32.0 x 2.5
SANW32DKOL3.5VA 49.5 mm 47.0 mm PN 160 L 28 mm 35 mm 32.0 x 2.5
SANW32DKOL4VA 49.0 mm 47.0 mm PN 160 L 27 mm 35 mm 32.0 x 2.5
SANW40DKOL2.0VA 49.0 mm 47.0 mm PN 160 L 38 mm 42 mm 38.0 x 2.5
SANW40DKOL2.5VA 49.0 mm 47.0 mm PN 160 L 37 mm 42 mm 38.0 x 2.5
SANW40DKOL3VA 50.0 mm 47.0 mm PN 160 L 36 mm 42 mm 38.0 x 2.5
SANW40DKOL4VA 49.0 mm 47.0 mm PN 160 L 34 mm 42 mm 38.0 x 2.5
Series: LL = Very light L = Light S = Heavy, PN = Nominal pressure PB = Max. operating pressure, d2 = for external pipe diameter

Order hints

Dichtungen aus NBR, FPM (Viton) auf Anfrage

Disclaimer

Despite careful checking, we cannot guarantee the accuracy of all information included on this site, and we accept no liability.
All data and information in our online catalogue are based on currently valid standards and the regulations from the employer's liability insurance association. Product safety can only be guaranteed when our assembly instructions are carefully observed. Non-adherence to these regulations can affect product operation and functioning and result in a loss of warranty. Our warranty is only valid for HANSA-FLEX products. Our products are constantly subject to further development and technical changes are therefore possible.