SA H VA

Welded on fitting

  • Image_1 Image_1
  • Image_2 Image_2

Properties

Connection 1 Welded on socket
Connection 2 metric cylindrical outer thread
Construction straight
Design Welded on fitting
Material Stainless steel
Scope of supply Socket (without union nut and cutting ring)
Sealing form 2 60° inner cone
Standard DIN 2353
ISO 8434-1

Hints

Information about fitting, installation, pressure loads and permissible operating temperatures can be found in the technical information for pipe fittings.

Article Table

Product Name L1 mm L2 mm Ø d1 mm AF mm G1 Ø d2 mm
Product Name L1 mm L2 mm Ø d1 mm AF mm G1 Ø d2 mm
SA NW 04 H VA 24 10 3.5 12 M 12 x 1,5 6
SA NW 06 H VA 25 10 4.5 14 M 14 x 1.5 8
SA NW 08 H VA 25 10 6.0 17 M 16 x 1.5 10
SA NW 10 H VA 25 10 8.0 19 M 18 x 1.5 14
SA NW 13 H VA 27 12 10.5 22 M 22 x 1.5 17
SA NW 16 H VA 28 12 13.0 27 M 26 x 1.5 21
SA NW 20 H VA 28 12 15.5 30 M 30 x 1.5 25
SA NW 25 H VA 30 14 21.0 41 M 38 x 1.5 30
SA NW 32 H VA 31 14 28.0 46 M 45 x 1.5 38
SA NW 40 H VA 32 14 35.0 55 M 45 x 2 44
SA NW 50 H VA 36 17 45.0 65 M 65 x 2 57
SA NW 60 H VA 36 17 55.0 80 M 78 x 2 64

Disclaimer

Despite careful checking, we cannot guarantee the accuracy of all information included on this site, and we accept no liability.
All data and information in our online catalogue are based on currently valid standards and the regulations from the employer's liability insurance association. Product safety can only be guaranteed when our assembly instructions are carefully observed. Non-adherence to these regulations can affect product operation and functioning and result in a loss of warranty. Our warranty is only valid for HANSA-FLEX products. Our products are constantly subject to further development and technical changes are therefore possible.