SANDSTRAHL

Sandblasting hose

  • Image_1 Image_1

Properties

Application area for cleaning metal, stone and other surfaces, and supplying highly abrasive media
Colour black
Inner layer highly abrasion resistant insulating natural rubber
Insert highly tear-resistant synthetic textile insert and copper braid
Media Gravel
Outer layer Natural and synthetic rubber, abrasion, ozone and weather resistant, pricked
Temp. max. 70 °C
Temp. min. -40 °C

Article Table

Product Name Einheit Rollenlänge m Betriebsdruck bar Nur als volle Rollenlänge bestellbar? Außen-Ø mm Innen-Ø mm Berstdruck bar Biegeradius min. mm
Product Name Einheit Rollenlänge m Betriebsdruck bar Nur als volle Rollenlänge bestellbar? Außen-Ø mm Innen-Ø mm Berstdruck bar Biegeradius min. mm
SANDSTRAHL13-7 Reel 40 12.0 bar Yes 27 mm 13 mm 36 bar 127 mm
SANDSTRAHL19-7 Reel 40 12.0 bar Yes 33 mm 19 mm 36 bar 190 mm
SANDSTRAHL25-7 Reel 40 12.0 bar Yes 39 mm 25 mm 36 bar 254 mm
SANDSTRAHL32-8 Reel 40 12.0 bar Yes 48 mm 32 mm 36 bar 320 mm
SANDSTRAHL38-9 Reel 40 12.0 bar Yes 56 mm 38 mm 36 bar 380 mm
SANDSTRAHL51-11 Meter 40 12.0 bar No 69 mm 51 mm 36 bar 510 mm
SANDSTRAHL63-9.5 Meter 40 12.0 bar No 82 mm 63 mm 36 bar 635 mm

Disclaimer

Despite careful checking, we cannot guarantee the accuracy of all information included on this site, and we accept no liability.
All data and information in our online catalogue are based on currently valid standards and the regulations from the employer's liability insurance association. Product safety can only be guaranteed when our assembly instructions are carefully observed. Non-adherence to these regulations can affect product operation and functioning and result in a loss of warranty. Our warranty is only valid for HANSA-FLEX products. Our products are constantly subject to further development and technical changes are therefore possible.